Datasheet

ManualsBrandsElectrolube ManualsChemicalsHigh Performance Acrylic Conformal Coating Spray 200 ml

Revision date: 18/02/2020 Revision: 2

SAFETY DATA SHEET

High Performance Acrylic

According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830

of 28 May 2015.

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name High Performance Acrylic

Product number HPA-a, EHPA200H, ZE

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses Appliance protection.

Uses advised against No specific uses advised against are identified.

1.3. Details of the supplier of the safety data sheet

Supplier ELECTROLUBE. A division of HK WENTWORTH LTD

ASHBY PARK, COALFIELD WAY,

ASHBY DE LA ZOUCH, LEICESTERSHIRE LE65 1JR

UNITED KINGDOM

+44 (0)1530 419600

+44 (0)1530 416640

info@hkw.co.uk

1.4. Emergency telephone number

Emergency telephone IN CASE OF EMERGENCY CALL:

+44 1865 407333 (24hr, Provided by Carechem 24)

+353 (0)1 809 2166 (Beaumont Hospital, Republic of Ireland only, 8am-10pm, 7 days a week)

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)

Physical hazards Aerosol 1 - H222, H229

Health hazards Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 Repr. 2 - H361d STOT SE 3 - H336 STOT RE 2 - H373

Environmental hazards Not Classified

2.2. Label elements

Hazard pictograms

Signal word Danger

Summary of content (13 pages)

PAGE 1
Revision date: 18/02/2020 Revision: 2 SAFETY DATA SHEET High Performance Acrylic According to Regulation (EC) No 1907/2006, Annex II, as amended. Commission Regulation (EU) No 2015/830 of 28 May 2015. SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name High Performance Acrylic Product number HPA-a, EHPA200H, ZE 1.2. Relevant identified uses of the substance or mixture and uses advised against Identified uses Appliance protection.
PAGE 2
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Hazard statements EUH208 Contains 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. H222 Extremely flammable aerosol. H229 Pressurised container: may burst if heated. H315 Causes skin irritation. H319 Causes serious eye irritation. H361d Suspected of damaging the unborn child. H336 May cause drowsiness or dizziness. H373 May cause damage to organs through prolonged or repeated exposure.
PAGE 3
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Toluene 30-60% CAS number: 108-88-3 EC number: 203-625-9 REACH registration number: 012119471310-51-XXXX Classification Flam. Liq. 2 - H225 Skin Irrit. 2 - H315 Repr. 2 - H361d STOT SE 3 - H336 STOT RE 2 - H373 Asp. Tox. 1 - H304 butanone 10-30% CAS number: 78-93-3 EC number: 201-159-0 REACH registration number: 012119457290-43-XXXX Classification Flam. Liq. 2 - H225 Eye Irrit.
PAGE 4
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Ingestion Rinse mouth thoroughly with water. Remove any dentures. Give a few small glasses of water or milk to drink. Stop if the affected person feels sick as vomiting may be dangerous. Do not induce vomiting unless under the direction of medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person.
PAGE 5
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Protective actions during firefighting Avoid breathing fire gases or vapours. Evacuate area. Keep upwind to avoid inhalation of gases, vapours, fumes and smoke. Ventilate closed spaces before entering them. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk. Cool containers exposed to flames with water until well after the fire is out.
PAGE 6
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Usage precautions Read and follow manufacturer's recommendations. Wear protective clothing as described in Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs. Avoid exposing aerosol containers to high temperatures or direct sunlight. The product is flammable. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Suspected of damaging the unborn child.
PAGE 7
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Appropriate engineering controls Provide adequate ventilation. Personal, workplace environment or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Use process enclosures, local exhaust ventilation or other engineering controls as the primary means to minimise worker exposure.
PAGE 8
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Flash point -4°C Closed cup. Evaporation rate Not available. Evaporation factor Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Not available. Other flammability Not available. Vapour pressure Not available. Vapour density Not available. Relative density Not available. Bulk density 0.78 kg/l Solubility(ies) Not available. Partition coefficient Not available.
PAGE 9
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic 11.1. Information on toxicological effects Acute toxicity - oral Notes (oral LD₅₀) Based on available data the classification criteria are not met. Acute toxicity - dermal Notes (dermal LD₅₀) Based on available data the classification criteria are not met. Acute toxicity - inhalation Notes (inhalation LC₅₀) Based on available data the classification criteria are not met. Skin corrosion/irritation Animal data Irritating.
PAGE 10
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Route of exposure Ingestion Inhalation Skin and/or eye contact Target organs Central nervous system SECTION 12: Ecological information Ecotoxicity Not regarded as dangerous for the environment. However, large or frequent spills may have hazardous effects on the environment. 12.1. Toxicity Toxicity Based on available data the classification criteria are not met. 12.2.
PAGE 11
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Proper shipping name (ADR/RID) AEROSOLS Proper shipping name (IMDG) AEROSOLS Proper shipping name (ICAO) AEROSOLS Proper shipping name (ADN) AEROSOLS 14.3. Transport hazard class(es) ADR/RID class 2.1 ADR/RID classification code 5F ADR/RID label 2.1 IMDG class 2.1 ICAO class/division 2.1 ADN class 2.1 Transport labels 14.4.
PAGE 12
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) (as amended). Commission Regulation (EU) No 2015/830 of 28 May 2015.
PAGE 13
Revision date: 18/02/2020 Revision: 2 High Performance Acrylic Hazard statements in full H220 Extremely flammable gas. H222 Extremely flammable aerosol. H225 Highly flammable liquid and vapour. H229 Pressurised container: may burst if heated. H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H311 Toxic in contact with skin. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage.