Datasheet

Page 1
IPA
Electronic Cleaning Solvent
IPA is an internationally approved solvent which cleans to standards required by the major electronics
manufacturers. Will thoroughly clean all electronic equipment and is safe to use on most plastics.
 Non-halogenated cleaning solvent; will not attack the ozone layer
 Fast evaporation rate; quick and efficient cleaning and degreasing
 Dries without leaving any residue; leaves a clean, dry surface in one cleaning step
 Cost effective cleaning solvent
Approvals RoHS-2 Compliant (2011/65/EU): Yes
NATO Stock no (IPA400H): 6850-99-083-2856
Typical Properties Appearance Clear, Colourless Liquid
Boiling Point (°C) 82
Flash Point (°C) 12
Density @ 20°C (g/ml) 0.787
Purity (%) 99.7
Water Content (%) 0.15
Miscibility in Water Complete
TLV (ppm) 400
Residue on Evaporation (ppm) 0.002g/100ml max.
Evaporation Rate 1.5 (ether = 1)
Description Packaging Order Code Shelf Life
Electronic Cleaning Solvent 200ml Aerosol IPA200 36 Months
400ml Aerosol IPA400H 36 Months
1 Litre Bulk IPA01L 72 Months
5 Litre Bulk IPA05L 72 Months
25 Litre Bulk IPA25L 72 Months
Thermal Printer Head Pen IPA12PB 24 Months
Directions for Use
Suitable for electronic equipment and PCB cleaning. Safe on most plastics (some painted surfaces should be
tested before use) and components in electronic and video equipment, computers, optical and precision
instruments, cameras, etc. Product contains flammable solvent so do not spray onto live electrical equipment or
other sources of ignition. Immerse surface to be cleaned or spray onto surface to excess and allow to
evaporate. A brush or foam tipped bud may be used to remove any stubborn deposits. Do not use at angles
>45° from vertical.
Revision 3: October 2017