Datasheet

Page 1
LRM
Label Remover
LRM is suitable for the removal of pressure sensitive adhesive labels from a variety of surfaces. LRM should be
sprayed or wiped onto the label to be removed, and left for 5 minutes. After this time the label should peel off
and the surface can be wiped clean.
 Non-CFC, non-halogenated solvent for the safe removal of adhesive labels
 Allows label to be simply peeled off without leaving adhesive residue or scratching surface
 Harmless to most plastics, rubbers, elastomers, and surface coatings when used as directed
 Test sensitive plastics on a small area first; do not use on polystyrene
Approvals
RoHS-2 Compliant (2011/65/EU):
Yes
Nato Stock No. (LRM200D): 8010-99-810-4705
Typical Properties
Density (g/ml @ 20°C): 0.830 (bulk) 0.79 (aerosol)
Inhalation Toxicity: 300 ppm
Residue on Evaporation: <1ppm
Description Packaging Order Code Shelf Life
Label Remover
200ml Aerosol LRM200D 36 Months
200ml Aerosol with Brush LRM200DB 48 Months
1 Litre Bulk LRM01L 72 Months
Revision 2: March 2017