Datasheet

Page 1

SCP

Silver Conductive Paint

SCP provides a thin, smooth, adherent, flexible film of high electrical conductivity that can be applied on a

variety of substrates, including plastics, paper, wood, textiles, glass, ceramics and metals. It can be applied by

brushing, spraying, dipping, or a pencil and dries quickly at room temperature. SCP is suitable for PCB design

and repair, mark sensing e.g. on recording tapes, screening plastic housings against high frequency fields,

earthing strips, connections to non-solderable surfaces, electroplating pre-coats, contact surfaces,

potentiometer tracks, etc.

 Thin film only required; economic in use

 Good electrical conductivity and low surface resistivity

 Excellent adhesion to wide range of materials

 Cures at room temperature

Typical Properties

Appearance Grey Liquid

Silver content 45%

Carrier Solvent Blend

Viscosity @ 25°C 70 mPa s

Density @ 20°C 1.44 g/ml

Surface Resistance @ 0.6 to 2 g/100cm

0.01 to 0.03 Ohms/sq

Electrical Rating 0.1 to 1 W/cm

Drying time @ 20°C 10 minutes

Temperature Range -80°C to +125°C

Flash Point 12°C

Description Packaging Order Code Shelf Life

Silver Conductive Paint 3g Bottle SCP03B 24 months

26g Bottle SCP26G 24 months

50g Bottle SCP50G 24 months

1kg bulk SCP01K 24 months

Directions for Use

Shake or stir the product thoroughly before use. Ensure surface to be coated is clean, dry and free from oil,

grease or dirt. Replace cap securely after use to avoid evaporation of the solvents. Use Electrolube CPL after

application to prevent oxidation or formation of silver compounds and to prevent mechanical damage.

Revision 2: Aug 2015