Datasheet

ManualsBrandsElectrolube ManualsChemicals2GX Contact Treatment Grease Syringe 35 ml

Page 1

SGB

Contact Treatment Grease

SGB (2X Grease) was developed as an extension of the No 2 Range (SGA and SOA) with increased plastics

compatibility. This product development was necessary due to the use of thermoplastics in the electronics and

automotive industries. SGB will significantly increase contact performance and lifetime. Separate data sheets

are available for the diluted oil (EML), oil (SOB) and the low penetration grease (SGBH).

 Improves contact performance by increasing effective contact area

 Enhanced plastics compatibility; suitable for a range of plastics and rubbers (testing advised)

 Highly stable synthetic material, fully inhibited against oxidisation and copper corrosion

 Excellent penetration and cooling properties; prevents arcing, thus reduces contact wear

Approvals

RoHS-2 Compliant (2011/65/EU):

Yes

Typical Properties

Colour

Beige

Density (g/ml)

1.11

Temperature Range (°C)

-35 to +130

Vapour Pressure

0.001 Torr @ 20°C

Evaporation Weight Loss (% 7 days @ 100°C)

3.73

Evaporation Weight Loss (% 7 days @ 125°C)

3.90

Copper Strip Corrosion (IP154 / ISO 2160)

≤1b

Drop Point (IP32 / ISO 2176 (°C))

250

Cone Penetration Worked (ASTM D217, 60 strokes @ 20°C)

320

Cone Penetration Un-worked (ASTM D 217 @ 20°C)

310

Cone Penetration Un-worked (ASTM D 217 @ -40°C)

180

Consistency (NLGI)

Fliessdruck (Flow Pressure) (DIN 51805, mbar @ -40°C)

720

Oil Bleed / Separation (IP121)

Silver Corrosion (DIN 51759, 3 hrs @100°C)

No Change

Plastic Compatibility - ABS

Test

Plastic Compatibility - PC

Test

Thickener

Clay

Water Content (%)

0.6

UV Trace

Summary of content (3 pages)

PAGE 1
Page 1 SGB Contact Treatment Grease SGB (2X Grease) was developed as an extension of the No 2 Range (SGA and SOA) with increased plastics compatibility. This product development was necessary due to the use of thermoplastics in the electronics and automotive industries. SGB will significantly increase contact performance and lifetime. Separate data sheets are available for the diluted oil (EML), oil (SOB) and the low penetration grease (SGBH).
PAGE 2
Page 2 Electrical Properties Breakdown Voltage (BS148 (kV)) 4.05 Base Oil Properties Base Oil Type Base Oil Viscosity @ 40°C (Kinematic Viscosity (cSt)) Base Oil Viscosity @ 100°C (Kinematic Viscosity (cSt)) Base Oil Viscosity Index (ASTM D 2270) Pour Point (ASTM D 97 (°C)) Flash Point (COC ASTM D 92 (°C)) Mechanical Properties 4 Ball Wear Weld Load Poly Alkylene Glycol 225 37 214 -37 214 2.148 126 Packing Order Code Shelf Life Container Dimension NATO Stock No. 1Kg Bulk 5Kg Bulk 12.
PAGE 3
Page 3 SGB can be applied by one of the following methods (although this list is not exhaustive): Manually by way of a syringe or aerosol (SGB200D) Semi-automated using syringe dispensing Fully automated by way of a follower/pusher plate with dispensing system In production processes, contact lubricant should be applied to the contact components as soon as possible after manufacture or plating to protect against handling contamination and tarnishing.