Datasheet

SRI
Saferinse
SRI is an aqueous deionised solvent blend which removes any solubilised residues after cleaning printed circuit
board assemblies with Electrolube SWA.
• Deionised solvent blend for rinsing PCBs; suitable for use in conjunction with SWA
• Supplied in aerosol form; ideal for manual cleaning applications
• Aqueous based cleaning agent; eliminates the use of hazardous and volatile solvents
• Compliments the Electrolube Safewash Range for bulk application
Approvals RoHS-2 Compliant (2011/65/EU): Yes
Typical Properties Boiling Point (°C) 100
Flash Point None
Density (g/ml) 1.00
Description Packaging Order Code Shelf Life
SRI Aerosol 400 ml Aerosol SRI400H 48 Months
Directions for Use
Use for rinsing remaining residues after cleaning with Electrolube SWA. Hold the PCB at approx. 45° and spray
SRI generously onto the assembly and allow to run down the board. The PCB may be quickly dried using an
Electrolube Airduster (EAD).
Customers wanting to rinse larger quantities of PCBs should refer to Electrolube DEI. This product is designed
for use within the electronics industry and is available in 1 and 5 litre containers. A separate Technical Data
Sheet is available for this product.
Revision 1: Oct 2013