User manual

7. INSTALLATION
WARNING!
Read the "Safety Information"
carefully for your safety and cor-
rect operation of the appliance
before installing the appliance.
7.1 Positioning
Install this appliance at a location where
the ambient temperature corresponds to
the climate class indicated on the rating
plate of the appliance:
Cli-
mate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
7.2 Electrical connection
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be earthed. The pow-
er supply cable plug is provided with a
contact for this purpose. If the domestic
power supply socket is not earthed, con-
nect the appliance to a separate earth in
compliance with current regulations, con-
sulting a qualified electrician.
The manufacturer declines all responsibili-
ty if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
7.3 Fitting door panels
The door panel size must be 1-2 mm less
than that of the door and the maximum
thickness must be 4 mm.
With the refrigerator door closed, loosen
the screws from the removable side of the
frame and remove the frame.
Loosen the remaining screws.
Slide in the door panel and push it com-
pletely in.
Refit the frame and tighten all the screws.
7.4 Right hand door opening
2
1
The appliance is supplied with the right or
the left door opening. To change the
opening direction of the door do these
steps before you install the appliance:
Remove the pin (1) and the pivot (2) from
the appliance.
12
www.electrolux.com