User manual

Installing the door and the glass panels
AB C
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence.
Make sure that you put the glass panels
(A, B and C) back in the correct se-
quence. The middle panel (B) has a deco-
rative frame. The screen-printing zone
must face the inner side of the door.
Make sure that after the installation the
surface of the glass panel frame (B) on the
screen-printing zones is not rough when
you touch it.
Make sure that you install the middle pan-
el in the seats correctly (refer to the illus-
tration).
12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not
heat up.
The appliance is deacti-
vated.
Activate the appliance.
The appliance does not
heat up.
The clock is not set. Set the clock. Refer to
"Setting and changing the
time”.
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The appliance does not
heat up.
The automatic switch-off
is activated.
Refer to „Automatic
switch-off“.
ENGLISH 29