User manual

ManualsBrandsELECTROLUX-REX ManualsDomestic AppliancesFQP203XEV

Problem Possible cause Remedy

The appliance does not

heat up.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact

a qualified electrician.

The lamp does not oper-

ate.

The lamp is defective. Replace the lamp.

The display shows C3. You want to start the py-

rolytic cleaning but you

did not fully close the

door.

Fully close the door.

The display shows F102. The door lock is defec-

tive.

• Fully close the door.

• Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows

F102 again, contact

the Customer Care De-

partment.

The display shows an er-

ror code that is not in this

list.

There is an electrical fault. • Deactivate the appli-

ance with the house

fuse or the safety

switch in the fuse box

and activate it again.

• If the display shows the

error code again, con-

tact the Customer Care

Department.

The display does not

show the time during the

off status.

The display is deactiva-

ted.

Touch and at the

same time to activate the

display again.

If you cannot find a solution to the prob-

lem yourself, contact your dealer or the

service centre.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.) .........................................

Product number (PNC) .........................................

Serial number (S.N.) .........................................

13. INSTALLATION

WARNING!

Refer to the Safety chapters.