KTI8500BE FR TABLE DE CUISSON NOTICE D'UTILISATION
www.electrolux.com TABLE DES MATIÈRES 1. CONSIGNES DE SÉCURITÉ................................................................................ 2 2. INSTRUCTIONS DE SÉCURITÉ........................................................................... 4 3. DESCRIPTION DE L'APPAREIL........................................................................... 7 4. UTILISATION QUOTIDIENNE............................................................................... 9 5. CONSEILS.................................
FRANÇAIS 3 Conservez toujours cette notice avec votre appareil pour vous y référer ultérieurement. 1.
www.electrolux.com • • • • • • N'entreposez rien sur les surfaces de cuisson. Ne posez pas d'objets métalliques tels que couteaux, fourchettes, cuillères ou couvercles sur la table de cuisson car ils pourraient chauffer. N'utilisez pas de nettoyeur vapeur pour nettoyer l'appareil. Après utilisation, éteignez toujours la zone de cuisson à l'aide de la manette de commande correspondante et ne vous fiez pas à la détection des récipients.
FRANÇAIS • Assurez-vous que l'appareil est bien installé. Un câble d'alimentation lâche et inapproprié ou une fiche (si présente) non serrée peuvent être à l'origine d'une surchauffe des bornes. • Utilisez le câble d'alimentation électrique approprié. • Ne laissez pas le câble d'alimentation s'emmêler. • Assurez-vous qu'une protection antiélectrocution est installée. • Utilisez un collier anti-traction sur le câble.
www.electrolux.com • Les vapeurs dégagées par l'huile très chaude peuvent provoquer une combustion spontanée. • L'huile qui a servi contient des restes d'aliments pouvant provoquer un incendie à température plus faible que l'huile n'ayant jamais servi. • Ne placez pas de produits inflammables ou d'éléments imbibés de produits inflammables à l'intérieur ou à proximité de l'appareil, ni sur celui-ci. AVERTISSEMENT! Risque d'endommagement de l'appareil.
FRANÇAIS 3. DESCRIPTION DE L'APPAREIL 3.1 Description de la table de cuisson 1 1 Zone de cuisson à induction 2 Panneau de commande 1 240 mm 145 mm 1 1 2 3.2 Description du bandeau de commande 1 2 3 4 5 11 6 7 10 9 8 Les touches sensitives permettent de faire fonctionner l'appareil. Les affichages, les voyants et les signaux sonores indiquent les fonctions activées. TouFonction che sensitive MARCHE/ARRÊT 1 Description Pour allumer et éteindre la table de cuisson. 2 Touches verrouil.
www.electrolux.com TouFonction che sensitive 7 - 8 / 9 10 11 - Description Affichage du minuteur Pour indiquer la durée, en minutes. - Pour choisir la zone de cuisson. - Pour augmenter ou diminuer la durée. Fonction Booster Pour activer et désactiver la fonction. Bandeau de sélection Pour sélectionner un niveau de cuisson. 3.3 Indicateurs de niveau de cuisson Affichage Description La zone de cuisson est désactivée. La zone de cuisson est activée. - La fonction STOP+GO est activée.
FRANÇAIS 9 4. UTILISATION QUOTIDIENNE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 4.1 Activation et désactivation Niveau de cuisson La table de cuisson s'éteint au bout de : 10 - 14 1 heure et demie Appuyez sur pendant 1 seconde pour activer ou désactiver la table de cuisson. 4.3 Niveau de cuisson 4.
www.electrolux.com Lorsque vous n'utilisez qu'une seule zone de cuisson, nous vous recommandons d'utiliser celle située à l'arrière. De même, lorsque vous utilisez un récipient de grande taille, nous vous recommandons de le placer vers la zone de cuisson arrière. 4.6 Démarrage automatique de la cuisson Cette fonction vous permet d'atteindre le niveau de cuisson sélectionné en un temps plus court.
FRANÇAIS Pour sélectionner la zone de cuisson : appuyez sur à plusieurs reprises jusqu'à ce que l'indicateur de la zone de cuisson correspondante s'affiche. . touche du minuteur. s'allume. Lorsque le voyant de la zone de cuisson clignote lentement, le minuteur démarre. Pour contrôler la durée de fonctionnement de la zone de cuisson sélectionnée : sélectionnez la zone de cuisson à l'aide de . Le voyant de la zone de cuisson clignote rapidement.
www.electrolux.com Appuyez sur pendant 4 secondes. Réglez le niveau de cuisson dans les 10 secondes qui suivent. Vous pouvez utiliser la table de cuisson. Lorsque vous éteignez la table de cuisson avec fonction est de nouveau activée. , la 4.12 OffSound Control (Désactivation et activation des signaux sonores) Éteignez la table de cuisson. Appuyez sur pendant 3 secondes. L'affichage s'allume, puis s'éteint. Appuyez sur pendant 3 secondes. ou s'allume.
FRANÇAIS 13 répartie entre deux zones de cuisson fonctionnant en paire. Lorsque vous réglez la fonction Limitation de puissance sur plus de 4,5 kW, la puissance de la table de cuisson est 5. CONSEILS AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 5.1 Ustensiles de cuisson Sur les zones de cuisson à induction, un champ électromagnétique puissant chauffe les récipients très rapidement. Utilisez des récipients adaptés aux zones de cuisson à induction.
www.electrolux.com 5.3 Öko Timer (Minuteur éco) Pour réaliser des économies d'énergie, la zone de cuisson se désactive automatiquement avant le signal du minuteur. La différence de temps de fonctionnement dépend du niveau et de la durée de cuisson. cuisson n'est pas linéaire. Lorsque vous augmentez le niveau de cuisson, l'augmentation énergétique de la zone de cuisson n'est pas proportionnelle.
FRANÇAIS 15 6. ENTRETIEN ET NETTOYAGE AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. 6.1 Informations générales • Nettoyez la table de cuisson après chaque utilisation. • Utilisez toujours un plat de cuisson dont le fond est propre. • Les rayures ou les taches sombres sur la surface n'ont aucune incidence sur le fonctionnement de la table de cuisson. • Utilisez un nettoyant spécialement adapté à la surface de la table de cuisson. • Utilisez un racloir spécial pour la vitre.
www.electrolux.com Problème Cause probable Solution Vous avez appuyé sur plu- N'appuyez que sur une sieurs touches sensitives en seule touche sensitive à la même temps. fois. La fonction STOP+GO est activée. Reportez-vous au chapitre « Utilisation quotidienne ». Il y a de l'eau ou des taches Nettoyez le bandeau de de graisse sur le bandeau commande. de commande. Un signal sonore retentit et la table de cuisson s'éteint. Un signal sonore retentit lorsque la table de cuisson est éteinte.
FRANÇAIS Problème et un chiffre s'affichent. 17 Cause probable Solution Le récipient n'est pas adapté. Utilisez un récipient adapté. Reportez-vous au chapitre « Conseils ». Le diamètre du fond du récipient de cuisson est trop petit pour la zone. Utilisez un récipient de dimensions appropriées. Reportez-vous au chapitre « Caractéristiques techniques ». Le récipient de cuisson ne recouvre pas la croix / le carré. Recouvrez complètement la croix / le carré.
www.electrolux.com 8. INSTALLATION Contactez votre service après-vente agréé. AVERTISSEMENT! Reportez-vous aux chapitres concernant la sécurité. AVERTISSEMENT! L'ensemble des branchements électriques doit être effectué par un technicien qualifié. 8.1 Avant l'installation Avant d'installer la table de cuisson, notez les informations de la plaque signalétique ci-dessous. La plaque signalétique se trouve au bas de la table de cuisson. ATTENTION! Ne percez et ne soudez jamais les extrémités des fils.
FRANÇAIS 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm < 20 mm B > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm A B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
www.electrolux.com min. 12 mm min. 2 mm 8.5 Enceinte de protection Si vous utilisez une enceinte de protection (accessoire supplémentaire), l'espace de circulation d'air de 2 mm et le fond de protection installé directement sous la table de cuisson ne sont plus nécessaires. L'enceinte de protection n'est pas disponible dans tous les pays. Veuillez contacter votre revendeur local. Vous ne pouvez pas utiliser l'enceinte de protection si vous installez la table de cuisson au-dessus d'un four. 9.
FRANÇAIS 21 9.2 Caractéristiques des zones de cuisson Zone de cuisson Puissance nominale (niveau de cuisson max.) [W] Fonction Booster [W] Fonction Diamètre du Booster durée récipient [mm] maximale [min] Avant gauche 2300 3200 10 125 - 210 Arrière gauche 2300 3200 10 125 - 210 Avant centrale 1400 2500 4 125 - 145 Arrière droite 2300 3600 10 180 - 240 La puissance des zones de cuisson peut légèrement différer des données du tableau.
www.electrolux.com • Si possible, couvrez toujours les récipients de cuisson avec un couvercle pendant la cuisson. • Activez toujours la zone de cuisson après avoir posé le récipient dessus. • Placez les plus petits récipients sur les plus petites zones de cuisson. • Posez directement le récipient au centre de la zone de cuisson. • Vous pouvez utiliser la chaleur résiduelle pour conserver les aliments au chaud ou pour faire fondre. 11.
FRANÇAIS 23
867317179-A-482014 www.electrolux.