LI 1070 E ................................................ .............................................
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Product description Control panel First use Daily use Helpful hints and tips Washing programmes Care and cleaning 2 4 5 7 7 9 11 13 What to do if… Technical data Consumption values Installation Electrical connection Environment concerns Building in 16 19 19 20 22 22 23 Subject to change without notice. SAFETY INFORMATION Important! Read carefully & keep for future reference.
electrolux 3 • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual. • After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.
electrolux PRODUCT DESCRIPTION Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy.
electrolux 5 Bleach Alternatively the softener, it is also possible to use a bleach agent in the compartment with the programmes for white cottons. Proceed as follows: • Put the bleach in the compartment . Do not exceed the «MAX» mark in the detergent dispenser drawer. • Run a programme for white cottons. • At the end of the programme, run the programme RINSE. Use softener, if desired. This helps to eliminate any bleach residues.
electrolux Prelavaggio By selecting this option the machine performs a prewash cycle before the main wash phase. The washing time will be prolonged. This option is recommended for heavily soiled laundry. Quotidiano A cycle to be used for daily soiled cotton, synthetic or delicate items in order to obtain good washing performance in a short time. Breve Short cycle for lightly soiled items or for laundry which needs only freshening up. We recommend you to reduce the fabrics loading.
electrolux 7 Table of Symbols = Cold wash = Wool = Handwash = No Spin = Rinse Hold = Washing = Door Locked = End of cycle = Delay Start FIRST USE • Ensure that the electrical and water connections comply with the installation instructions. • Remove the polystyrene block and any material from the drum. • Pour 2 litres of water into the main of the deterwash compartment gent drawer in order to activate the ECO valve.
electrolux Select the required programme by turning the programme selector dial (1) Turn the programme selector dial to the required programme. The washing machine will automatically select the maximum spin value provided for the programme you have chosen. You can change this value by pressing the corresponding button. The green pilot light of the button 5 starts to flash. The selector dial can be turned either clockwise or counterclockwise. Turn to position to reset programme/Switching the machine off.
electrolux 9 again. If you have chosen a delayed start, the machine will begin the countdown. If an incorrect option is selected, the red pilot light of the button 5 blinks for 3 times. Altering an option or a running programme It is possible to change some options before the programme carries them out. Before you make any change, you must PAUSE the appliance by pressing the button 5. Changing a running programme is possible only by resetting it.
electrolux New coloured items may run in the first wash; they should therefore be washed separately the first time. Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste. Treat curtains with special care. Remove hooks or tie them up in a bag or net. Removing stains Stubborn stains may not be removed by just water and detergent.
electrolux 11 Degrees of water hardness Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the wa- ter hardness degree is medium or high we suggest you to add a water softener following always the manufacturer’s instructions. When the degree of hardness is soft, readjust the quantity of the detergent.
electrolux Programme - Maximum and Minimum Temperature Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Options Sintetici 60° - 40° - 30° - Cold Main wash - Rinses - Spin Spin at maximum 800 rpm Max. load 3 kg - Reduced load 1,5 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. SPIN NO SPIN RINSE HOLD PRELAVAGGIO1) QUOTIDIANO BREVE2) EXTRA RISCIACQUO Delicati 40° - 30° Main wash - Rinses - Spin Spin at maximum 500 rpm Max.
electrolux 13 Programme - Maximum and Minimum Temperature Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry Centrifuga Drain and long spin Spin at maximum 1000 rpm Max. load 7 kg Separate spin for hand washed garments and after programmes with options selected which end with water left in the tub. You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun.
electrolux 1 2 2. Run a washing cycle without any washing to clean off any cleaning agent residues. Programme: Short Cotton Programme at maximum temperature and add approx. 1/4 measuring cup of detergent. Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Flush it out under a tap, to remove any traces of accumulated powder. To aid cleaning, the top part of the additive compartment should be removed. Clean all parts with water.
electrolux 15 4. Release the emergency emptying hose (B), place it in the container and remove its cap cover 6. Remove foreign bodies and fluff from the filter seat and from the pump impeller. Check carefully whether the pump impeller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Service Centre. 5. When no more water comes out, unscrew the pump cover (A) by turning it anti-clockwise and remove the filter. Use pliers, if necessary.
electrolux Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it. Cleaning the water inlet filters If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. 1. Turn off the water tap. 2. Unscrew the water inlet hose. 3.
electrolux 17 During machine operation it is possible that the red pilot light of button 5 blinks to indicate that the machine is not working. It is possible to recognize the machine fault by the number of button 5 light flashes. If the number of flashes is different from the ones indicated below, this is related to a fault that you cannot solve. In this case, contact your local Service Centre. Press simultaneously the buttons 4 and 5 for a few seconds.
electrolux Problem Possible cause/Solution There is water on the floor: Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. • Check the water inlet hose connection. The drain or inlet hose is damaged. • Replace it with a new one.
electrolux 19 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. ... ... ... Prod. No. ... ... ... Ser. No. ...
electrolux Off Mode (W) Left On Mode (W) 0.1 1.6 INSTALLATION Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom. 4. Slide out the relevant plastic spacers. 5.
electrolux 21 2. The other end of the inlet hose which connects to the machine can be turned as showed in the picture. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Caution! Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
electrolux • In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. • Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be ventilated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. The drain hose must not be kinked. The drain hose may be extended to a maximum of 4 metres.
electrolux 23 This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!). • The machine works more economically if it is fully loaded.
electrolux A (steel disk + rubber ring) into the inner side of the door. Its position must correspond to the magnet B on the appliance (Fig. 6). Fig. 4 Warning! Do not remove the screw C. 1 2 Fig. 6 A B c) Mounting the door Fix the hinges to the appliance by means of the M5x15 screws. The hinges can be adjusted to compensate for possible uneven thickness of the door. To align the door perfectly it is necessary to loosen the screw, adjust the door and tighten the screw A again (Fig. 5).
electrolux 25
electrolux
electrolux 27
www.electrolux.
