RWF 1276 HDW ................................................ .............................................
www.electrolux.com CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 3 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The operating water pressure (minimum and maximum) must be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa) • The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. 2.
ENGLISH Water connection • Make sure not to cause damage to the water hoses. • The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. 2.2 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance.
www.electrolux.com 3. PRODUCT DESCRIPTION 1 2 2 Detergent dispenser 3 3 Control panel 4 Door handle 5 Rating plate 4 5 6 Drain pump filter 7 Feet for the appliance level 3.1 Fixing plate kit (4055171146) 6 7 1 Worktop Available from your authorized dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. Follow the instructions supplied with the kit. 4.
ENGLISH 4.1 Display A G B C F E A) The Temperature area: B) – – : Cold water indicator – : the spin phase – : the steam phase : Time Manager indicator. – : the washing phase : Temperature indicator : the rinses phase – C) The time area: – D : the programme duration : the delay start : Extra rinse permanent option.
www.electrolux.com Programme Temperature range Type of load and soil Maximum load, Maximum spin Lana / A mano 40 °C – Cold Machine washable wool, hand washable wool and delicate fabrics with «hand washing» care symbol. 2 kg, 1200 rpm Jeans 60 °C – Cold Items in denim and jersey. Also for items in dark colours. 7 kg, 1200 rpm To rinse and spin the laundry. All fabrics. 8 kg, 1200 rpm Risciacquo Cold To spin the laundry and to drain the water in the drum. All fabrics.
ENGLISH 9 Programme Eco 1) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) If you set No Spin option the only drain phase is available. 6. CONSUMPTION VALUES At programme start the display shows the duration programme for the maximum load capacity.
www.electrolux.com Programmes Lana 30 °C Load (Kg) Energy consumption (kWh) Water consumption (litre) Approximate programme duration (minutes) Remaining moisture (%)1) 2 0.25 45 58 30 Standard cotton programmes Standard 60 °C cotton 7 0.72 45 232 53 Standard 60 °C cotton 3.5 0.62 33 190 53 Standard 40 °C cotton 3.5 0.47 34 186 53 Off Mode (W) Left On Mode (W) 0.48 0.
To drain the water refer to ‘At the end of the programme’. 7.3 Prewash With this option you can add a prewash phase to a washing programme. Use this option for heavy soil. When you set this option the programme duration increases. The related indicator comes on. 7.4 Delay Start With this option you can delay the start of a programme from 30 minutes to 20 hours. The display shows the related indicator. 7.5 Extra Rinse With this option you can add some rinses to a washing programme.
www.electrolux.com • The programme is completed. • The appliance has a malfunction. To deactivate/activate the acoustic signals, press and at the same time for 6 seconds. If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. 8. BEFORE FIRST USE 1. 2. Put 2 litre of water in the detergent compartment for washing phase. This activates the drain system. Put a small quantity of detergent in the compartment for washing phase. 3.
ENGLISH Detergent compartment for washing phase. Compartment for liquid additives (fabric conditioner, starch). Compartment for bleach agent. Flap for powder or liquid detergent. Liquid or powder detergent 1. 2. A 1 2 3. 4. B • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid then the maximum level. – Do not set the prewash phase.
www.electrolux.com 2. – The display shows the level of the Time Manager, the programme duration and the indicators of the programme phases If necessary, change the temperature, the spin speed, the cycle duration, or add available options. When you activate an option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 9.
ENGLISH 9.10 At the end of the programme • The appliance stops automatically. • The acoustic signal operates (if it is activated). • In the display a comes on. goes off. • The indicator • The door lock indicator goes off. • Remove the laundry from the appliance. Make sure that the drum is empty. • Keep the door ajar, to prevent the mildew and odours. • Close the water tap. • Press the button for some seconds to deactivate the appliance.
www.electrolux.com occurs, adjust manually the items in the tub and start the spin phase again. 10.2 Stubborn stains For some stains, water and detergent is not sufficient. We recommend that you remove these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. 10.3 Detergents and additives • Only use detergents and additives specially made for washing machines.
ENGLISH 17 • Set the cotton programme with the highest temperature with a small quantity of detergent. 11.4 Door seal Regularly examine the seal and remove all objects from the inner part. 11.5 Cleaning the detergent dispenser 1. 2. 1 2 3. 4. 11.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
www.electrolux.com 1. 2. 1 1 2 3. 4. 2 1 5. 6. 1 7. 2 8.
ENGLISH 19 9. 11.7 Cleaning the inlet hose and the valve filter 1. 2. 1 2 3 3. 4. 20° 11.8 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. 2. 45° Put 2 litres of water in the main wash compartment of the detergent dispenser.
www.electrolux.com 1. 2. 3. 4. 5. Disconnect the mains plug from the mains socket. Close the water tap. Remove the water inlet hose. Put the two ends of the inlet hose in a container and let the water flow out of the hose. Empty the drain pump. Refer to the emergency drain procedure. 6. When the drain pump is empty, install the inlet hose again. WARNING! Make sure that the temperature is more than 0 °C before you use the appliance again.
ENGLISH Problem Possible solution The appliance does not drain the water. Make sure that the sink spigot is not clogged. 21 Make sure that the drain hose has no kinks or bends. Make sure that the drain filter is not clogged. Clean the filter, if necessary. Refer to 'Care and cleaning'. Make sure that the connection of the drain hose is correct. Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub.
www.electrolux.com Problem Possible solution Decrease the laundry load. After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Service. 13.
ENGLISH 23
132921991-A-172013 www.electrolux.
