User manual

• Measure out the detergent.
For the quantity of detergent, refer al-
ways to what is written on the product
packing and ensure that the detergent
can be poured in the drawer.
• Pour the liquid detergent in the compart-
ment
without exceeding the limit indi-
cated in the flap.
• Close the dispenser drawer.
Warning! Do not use the flap in
"DOWN" position with:
• Gelatinous detergent or thick deter-
gent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the
washing programme doesn't start
immediately.
In these cases, use the flap in "UP"
position .
Select the required programme by
turning the programme selector dial (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will automatically select a spin value for the
programme you have chosen. You can
change this value by turning the relevant di-
al. The green pilot light of the button 6
starts to flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
«O» to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 6 will blink 3 times
to indicate a wrong selection. The
machine will not perform the new
selected programme.
Reduce the spin speed or select the
available functions by turning the spin
selector dial (2)
The spin speed dial allows you to select the
spin speed of the selected programme or
the available functions.
The spin speeds indicated on the dial refer
to the cotton programmes.
Spin speed
selector
position
Programmes
with max
spin speed
1200 rpm
Programmes
with max
spin speed
900 rpm
Programmes
with max
spin speed
700 rpm
«1200» 1200 900 700
«900» 900 900 700
«700» 700 700 700
«500» 500 500 500
10 electrolux