Use and Care

18
Operating Instructions
How to adjust the rinse aid
setting
The rinse aid dosage setting is shown in
the status window.
1. Press and hold RINSE for 5
seconds until the status window
shows the current rinse aid setting of
L1, L2, L3 or L4.
2. Press the DELAY pad to toggle
though to the desired level. Once the
rinse aid level reaches L4, the level
will go back to L1 and start the count
over.
3. The selected setting will start blinking
in the status window and a beeping
sound will confirm that the setting is
being saved.
NOTE
Set the rinse aid dispenser to the
lowest setting (L1) when using multi-
product detergents that have a rinse aid
component added to the detergent.