Operating instructions

6
Installation Instructions
1 Remove door tape and empty drum contents, including
foam shipping brace inside rubber gasket of door.
2 Using a foam corner post from the packaging to protect
the floor, carefully lay the washer on its back.
Removing foam packaging
3 Remove styrofoam base and set it aside.
4 Carefully return the washer to an upright position.
5 Carefully move the washer to within 4 feet (1 m) of its
final location.
WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after the washer
is unpacked. Children might use them for play. Cartons
covered with rugs, bedspreads, or plastic sheets can
become airtight chambers causing suffocation. Place
all materials in a garbage container or make materials
inaccessible to children.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one person
move or lift the washer.
IMPORTANT
Save styrofoam base and shipping braces for use to help
prevent washer damage during any future moves.
x 2