Built-In Wall Oven Use & Care Guide

Setting Oven Controls

SETTING OVEN LOCKOUT FEATURE

The or pad controls the Oven Lockout feature. The Oven Lockout feature

automatically locks the oven door and prevents the Warmer Drawer from being turned on.

It does not disable the clock, Timer, electric and gas surface burners, Warmer Zone or

the interior oven lights.

SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:

The or and or pads control the Fahrenheit or Celsius temperature display

modes. The oven control can be programmed to display temperatures in Fahrenheit or

Celsius. The oven has been preset at the factory to display in Fahrenheit.

To activate the Oven Lockout feature:

1. Press and hold or for 3 seconds (Figure 1).

2. After 3 seconds a beep will sound and "DOOR LOCKED" will flash on the

control panel. Once the oven door is locked the "DOOR LOCKED" indicator will

stop flashing and remain on.

To reactivate normal oven operation:

1. Press and hold or for 3 seconds. A beep will sound. The "DOOR

LOCKED" will continue to flash until the oven door has completely unlocked

(See Figure 1).

2. The range is again fully operational.

To change display from Fahrenheit to Celsius or Celsius to

Fahrenheit:

1. To tell if the display is set for Fahrenheit or Celsius. Press or (figure 2)

and hold for 7 seconds; "550°" will appear in the display and a beep will sound.

If "F" appears, the display is set to show temperatures in Fahrenheit (Figure 3).

If "C" appears, the display is set to show temperatures in Celsius (Figure 4).

2. Press or to switch between Fahrenheit or Celsius display modes. The

display will show either "F" (Figure 3) or "C" (Figure 4).

3. Press or to accept the change or Press or to reject the

change.

Figure 1

Figure 2

Figure 3

Figure 4