User Instructions Dishwasher 40250 i

Operating Instructions

Interrupting the wash programme by opening the door of the dish-

washer

Hot steam may escape when the door is opened. Open the door care-

fully.

0 1. Open the door of the dishwasher. The wash programme stops.

2. Shut the door. The wash programme continues.

Switching Off the Dishwasher

When the wash programme is finished:

0 1. Turn the program selector to the I position. Power indicator light goes

out.

Hot steam may escape if the door is opened immediately after the end

of the programme. Therefore:

2. Open the door carefully.

Emptying the Dishwasher

• Hot dishes are sensitive to knocks. The dishes should therefore be

allowed to cool down before removing them from the appliance.

• The dishes will dry quicker if, when the programme has finished, you

briefly open the door fully and then leave it slightly ajar.

• Leave the dishes in the dishwasher for approx. 15 minutes after the

end of the programme so that they dry better and can cool down.

• Empty the lower rack first, then the upper rack. In this way you will

avoid any water left on the upper rack dripping onto the dishes in the

lower rack and causing water spots.

Care and Cleaning

Do not under any circumstances use furniture care products or aggres-

sive cleaners.

• If necessary, clean the controls only with a soft cloth and pure warm

water.

• The spray arms do not need cleaning.

• Occasionally check the internal containers, door seal, and water inlet

for soiling, clean if necessary.