Specifications

A-1
INSTALLATION
RANGER GXT
A-1
TECHNICAL SPECIFICATIONS - Ranger GXT (K2382-2 )
INPUT - GASOLINE ENGINE
RATED OUTPUT @ 104°F (40°C)- WELDER
HEIGHT WIDTH DEPTH WEIGHT
30 in.** 21.5 in. 42.25 in.
762 mm 546 mm 1073 mm
RATED OUTPUT @ 104°F (40°C)- GENERATOR
Welding Output
AC Constant Current 250A / 25V / 100%
DC Constant Current 250A / 25V / 100%
DC Constant Voltage 250A / 25V / 100%
Auxiliary Power
1
10,000 Watts Continuous, 60 Hz AC
11,000 Watts Peak, 60 Hz AC
120/240 Volts
PHYSICAL DIMENSIONS
Make/Model
Kohler
CH20S
Description
2 cylinder
4 Cycle
Air-Cooled
Gasoline
Engine.
Aluminum Alloy
with Cast Iron
Liners,
Electronic
Ignition
Operating
Speed (RPM)
High Idle 3700
Full Load 3500
Low Idle 2200
Displacement
cu. in.
(cu.cm.)
38(624)
Capacities
Fuel:
12 Gal (45.4 L)
Lubricating Oil:
2.0 Qts. (1.9 L)
Horsepower
20 HP @
3600 RPM
Starting
System
12VDC
Battery
Electric Start
Group 58
Battery
(435 cold
Cranking
Amps)
1. Output rating in watts is equivalent to volt - amperes at unity factor.Output voltage is within +/-10% at all loads up to rated capacity.
When welding available auxiliary power will be reduced.
** Top of enclosure, add 6.00”(152mm) for exhaust.
602 lbs. (273kg)
RECEPTACLES
(2) 120VAC Duplex (5-20R)
(1) 120/240VAC Dual Voltage
Full KVA (14-50R)
BATTERY CHARGING CIRCUIT BREAKER
20AMP for Battery Charging Circuit
AUXILIARY POWER CIRCUIT BREAKER
Two 20AMP for Two Duplex Receptacle
(1) 50AMP for Dual Voltage (2-pole)
RECEPTACLES AND CIRCUIT BREAKERS