User manual
Program
Antiall ergi
20 min. - 3 kg
Motions tøj
Koge-/Ku lørt
Synteti sk
Finvask
Uld/Silke
Damp
Vattæpper
Jeans
DIAL AND BUTTONS
On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease the
energy consumption in a few cases, you
may need to activate the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
Introduction
The options/functions are not
selectable with all washing
programmes. Check the
compatibility between options/
functions and washing
programmes in the
"Programme Chart". An option/
function can exclude another
one, in this case the appliance
doesn't allow you to set the
incompatible options/functions
together.
Make sure the screen and
touch buttons are always clean
and dry.
Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Set this option to change the default
temperature.
The indicator = cold water of the set
temperature comes on (the appliance
does not heat the water).
Spin
When you set a programme, the appliance
automatically sets the maximum spin
speed allowed.
Touch repeatedly this button to:
Activate the option
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The door stays locked and the drum
turns regularly to reduce creasing.
• You must drain the water to unlock the
door.
• If you touch the Start/Pause button, the
appliance performs the spinning phase
and drains the water.
The appliance empties the
water out automatically after 18
hours approximately.
Activate the option
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• The related indicator comes on.
13