User manual

You can activate this option:
• After you touch the Start/Pause button:
all the buttons and the programme dial
are deactivated (except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
Acoustic signals
The acoustic signals operate when the
programme is completed (sequence of
sounds for about 2 minutes).
To deactivate/activate the acoustic
signals, touch the and the buttons
simultaneously for about 6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option
touch the button and the button
simultaneously until relevant indicator
comes on/goes off on display.
BEFORE FIRST USE
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent into
the compartment marked .
4. Set and start a programme for cotton
at the highest temperature without any
laundry in the drum.
This removes all possible dirt from the
drum and the tub.
DAILY USE
WARNING! Refer to Safety
chapters.
Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION! Make sure that no
laundry stays between the seal
and the door. There is a risk of
water leakage or damage to
the laundry.
18