User manual

CAUTION! Do not use alcohol,
solvents or chemical products.
CAUTION! Do not clean the
metal surfaces with chlorine-
based detergent.
Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the instructions
that you find on the packaging
of the product.
Maintenance wash
With the low temperature programmes it is
possible that some detergent stays in the
drum. Perform a maintenance wash
regularly. To do this:
• Remove all laundry from the drum.
• Select the cotton programme with the
highest temperature or use if is
available programme Machine Clean.
Add a small quantity of powder
detergent into empty drum, in order to
rinse out any left residues.
Door seal
Regularly examine the seal and remove
all objects from the inner part.
Cleaning the drum
Regularly examine the drum to prevent
rust particles.
For a complete cleaning:
1. Clean the drum with special products
for stainless steel.
Always follow the instructions
that you find on the packaging
of the product.
2. Run a short cotton programme at high
temperature or use if is available
programme Machine Clean. Add a
small quantity of powder detergent into
empty drum, in order to rinse out any
left residues.
Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener and/or
formation of mould in the detergent
dispenser drawer, once in a while carry
out the following cleaning procedure:
1. Open the drawer. Press the catch
downwards as indicated in the picture
and pull it out.
24