User manual

10. Remove the three bolts by using the
key supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you keep
the packaging and the transit
bolts for any movement of the
appliance.
Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do not
stop the air circulation below
the appliance.
Make sure that the appliance
does not touch the wall or other
units.
2. Loosen or tighten the feet to adjust the
level.
WARNING! Do not put
cardboard, wood or equivalent
materials below the appliance
feet to adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the machine is installed
on a plinth or if a washer dryer
is stacked on the washing
machine, use the accessories
described in chapter
'Accessories'. Read carefully
the instructions supplied with
the appliance and with the
accessory.
7