32986851.
132986851.qxd 16/01/2006 08:53 Pagina 2 Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
132986851.qxd 16/01/2006 08:53 Pagina 3 Contents For the User Washing Hints Which detergent?....
132986851.qxd 16/01/2006 08:53 Pagina 4 Your New Washing Machine Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. ● ● ● ● The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme. The programme progress display shows the washing phase and the end of the programme .
132986851.
132986851.
132986851.qxd 16/01/2006 08:53 Pagina 7 7 Programme progress display Position O corresponds to to Reset programme / Switching OFF of the machine. By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. ATTENTION! If you turn the programme selector dial to an other programme when the machine is working, the lights of the programme progress display start to flash. The machine will not perform the new selected programme.
132986851.qxd 16/01/2006 08:53 Pagina 8 Operating Sequence 3. Select the required programme Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
132986851.qxd 16/01/2006 08:53 Pagina 9 6. Start the programme 9.Cancelling a programme Before starting up the machine check that: ● the appliance is plugged in ● the water supply tap is turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dispenser drawer are closed. To start the selected programme, press the “start pause” button; the corresponding light stops flashing. Only the “wash” light stays on.
132986851.qxd 16/01/2006 08:53 Pagina 10 WASHING 2 KG OF MIXED FABRICS AT 50°C Suppose you have 2 kg of lightly soiled mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 4. Select the required programme 1. Load the laundry Turn the programme selector dial to the programme 6. The “start pause” light starts to flash. The pilot lights corresponding to the various phases making up the programme come on.
132986851.qxd 16/01/2006 08:53 Pagina 11 7. Start the programme The door can only be opened after the relevant pilot light on the control panel has gone out. Release of the lock is also indicated by the coming on of the “end” light and the extinction the “door” light. Turn the programme selector dial to “O” to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap.
132986851.qxd 16/01/2006 08:53 Pagina 12 Washing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance.
2986851.qxd 16/01/2006 08:53 Pagina 13 Which detergent?.... And in which form? To ensure you obtain the best wash results from your appliance, it is important to use the right detergent in your everyday wash, and only detergents recommended for use in automatic machines. To maintain the appearance of your clothes and household textiles and to make them last longer you should use different types of detergent for different washes, whether for whites, colours or delicates.
132986851.qxd 16/01/2006 08:53 Pagina 14 Wash Care Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
132986851.qxd 16/01/2006 08:53 Pagina 15 Washing Programmes Programmes for cotton and linen Wash programme/ Washing symbol WHITES 95° ECO WASH 60° FAST COLOUREDS 60° Degree of soil and type of laundry For heavy soiled cotton items. White cotton, for example normally soiled work garments, sheets, household linen, underwear, towels. Fast coloured cotton or linen fabrics, normally soiled, shirts, underwear, towels. Programme dial position Description Possible options Max. Progr. time load mins.
132986851.qxd 16/01/2006 08:53 Pagina 16 Washing Programmes Programmes for synthetics, mixed fabrics, delicates and wool Wash programme/ Washing symbol MIXED FABRICS 60° - 50° - 40° DELICATES 40° - 30° WOOL 30° COLD WASH Degree of soil and type of laundry Synthetic or mixed fabrics, underwear, coloured garments, non-shrink shirts, blouses. Delicate fabrics, for example curtains Specially tested programme for wool garments bearing the “Pure new wool, nonshrink, machine washable” label.
132986851.qxd 16/01/2006 08:53 Pagina 17 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
132986851.qxd 16/01/2006 08:53 Pagina 18 • When no more water comes out, unscrew the pump cover and remove it. Always keep a cloth nearby to dry up spillage of water when removing the cover. Clean the filter using a hard bristle brush. Tighten up the inlet hose. P1090 P1115 The dangers of freezing • Remove any objects from the pump impeller by If the machine is exposed to temperatures below 0°C, certain precautions should be taken. ● Turn off the water tap. ● Unscrew the inlet hose.
132986851.qxd 16/01/2006 08:53 Pagina 19 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. During machine operation it is possible that the “end” light flashes to indicate that the machine is not working. On the AW 1460 W an acoustic warning signal is also heard.
132986851.qxd 16/01/2006 08:53 Pagina 20 Symptom Possible causes The machine vibrates when spinning ● ● ● ● ● The door will not open ● ● ● The internal packing has not been removed. The machine is in contact with the wall or furniture. The machine is not stable and level (check diagonally). The washing load is badly distributed in the drum. Maybe there is very little laundry in the drum. The programme is still running. The door lock has not yet released (the “door” light is still on).
132986851.
132986851.qxd 16/01/2006 08:53 Pagina 22 Installation Instructions It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
132986851.qxd 16/01/2006 08:53 Pagina 23 Unpacking Fill all the holes with the plastic plugs supplied with the instruction booklet. All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses are not squashed.
132986851.qxd 16/01/2006 08:53 Pagina 24 Water inlet Connect the hose to a tap with a 3/4” thread. Do not use previously used hoses for water connection. U piece supplied P1199 Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. P1088 Installation should comply with local water authority and building regulations’ requirements.
132986851.qxd 16/01/2006 08:53 Pagina 25 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place. P1051 Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation. Some vibration is inevitable, especially if mounted on a wooden floor. Sprung wooden floors are particularly susceptible to vibration. For advice, consult a builder.
132986851.qxd 16/01/2006 08:53 Pagina 26 Should the plug need to be replaced for any reason, proceed as described below. The wires in the mains lead are coloured in accordance with the following code: Green and Yellow - Earth Blue - Neutral Brown - Live If you require any further advice please contact your local water authority.
132986851.