User manual

Step 3 Close the oven door to the first opening position (approximately 70° an‐

gle).

Step 4

Hold the door trim (B) on the top edge of the door at the two sides and

push inwards to release the clip seal.

Step 5 Pull the door trim to the front to remove it.

Step 6

Hold the door glass panels on their top edge one by one and pull them

up out of the guide.

Step 7 Clean the glass panel with water and soap. Dry the glass panel careful‐

ly.

Step 8 When the cleaning is completed, do the above steps in the opposite se‐

quence.

Step 9 Install the smaller panel first, then the larger and the door.

47/64

CARE AND CLEANING