Repair manual

(SEE SCHEMATIC ON PAGE 4010 FOR ITEM NUMBERS)
OPERATING INSTRUCTIONS
HOSE REEL
The discharge of large amounts of dry chemical may create hazards to personnel such as reduced visibility and temporary
breathing difficulty.
1. Activate system by placing desired agent(s) "CHARGING SWITCH" in "ON" position. (Press dashboard
actuator if activating from the cab.)
2. Place desired agent(s) hose reel valve 9A/9B in "OPEN" position.
3. Unlock brake on hose reel.
4. Remove nozzle.
5. Unwind hose to desired length.
6. Place desired agent(s) nozzle discharge valve 2A/2B in "OPEN" position; operate as required.
NOTE: The Dry Chemical System and AFFF Foam System-can be used simultaneously or independently.
TURRET
The discharge of large amounts of dry chemical may create hazards to personnel such as reduced visibility and temporary
breathing difficulty.
1. Activate system by placing desired agent(s) "CHARGING SWITCH" in "ON" position. (Press dashboard
actuator if activating from cab.)
2. Release turret handle locking devices
3. Select desired spray pattern.
4. Activate turret by placing selected agent switch in "ON" position. Discharge may be stopped at any time by
placing switch in "OFF" position. To resume discharge, place switch in "ON" position.
NOTE: The Dry Chemical System and AFFF Foam System can be used simultaneously or independently.
4005