Repair manual

F8118 8/84
3.8.2 Models A30-70D
A. In these units, AC output is a standard two-wire output, with a hot and neutral lead. ’Only the "hot" lead (AC 1)
cannot be grounded.
B. The AC receptacles can be used up to their fused capacity of 15 amps per receptacle for all models.
C. If permanent connection of inverter is desired, follow these directions:
Connect AC leads to external AC junction box, using circuit breaker or fuses for each separate circuit. Only
the "hot" (BLACK) wire should not be grounded.
3.9 COMPLETE, SIGN AND MAIL WARRANTY INITIATION CARD
The final step is to initiate the inverter warranty. Proper installation is not complete until warranty is properly initiated, as
follows:
A. Fill in the final customer’s name and address and vehicle data.
B. Enter all checkout data from the harness and alternator checkout procedures in Section 6.
C. Sign your name and the company name and address, certifying that the installation was properly completed,
and enter the date of installation.
D. Fill in and sign the Owner’s Certificate of Warranty Initiation card from the first section of the manual.
E. Mail the stamped, self-addressed warranty initiation card to DYNAMOTE CORPORATION.
DYNAMOTE CORPORATION, 1200 W. Nickerson, Seattle, WA 98119 - 206-282-1000
4083