Owner's Guide

Installing Door Handles

Door Handle

Mounting Instruc-

tions

1 Remove handles from

protective packaging.

2 Position fresh food handle

end caps (A) over upper and

lower pre-installed shoulder

bolts (B) that are fastened

into door, ensuring the holes

for the set screws are facing

towards the opposite door.

3 While holding handle ﬁrmly

against door, fasten upper

and lower Allen set screws (C)

with supplied Allen wrench.

4 Repeat steps 2 and 3 to

install opposite handle.

Ensure the holes for the set

screws are facing towards the

ﬁrst door.

5 Position freezer handle end

caps over left and right pre-

installed shoulder bolts that

are fastened to the drawer,

ensuring the holes for the set

screws are facing down.

6 While holding handle ﬁrmly

against drawer, fasten left and

right Allen set screws (C) with

supplied Allen wrench.

Mounting Refrigerator Handles

Mounting Freezer Handle

NOTE

To ensure that handles are ﬂush with doors/drawer, make sure that set screws are completely tightened.

CAUTION

Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.