Owner's Guide

13
Installing Door Handles
Door Handle
Mounting
Instructions
1 Remove handles from
protective packaging.
2 Position fresh food handle
endcaps(A)overupperand
lower pre-installed shoulder
bolts (B) that are fastened
into door, ensuring the holes
for the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
andlowerAllensetscrews
(C)withsuppliedAllen
wrench.
4 Repeat steps 2 and 3 to
install opposite handle.
Ensure the holes for the set
screws are facing towards the
first door.
5 Position freezer handle end
caps over left and right pre-
installed shoulder bolts that
are fastened to the drawer,
ensuring the holes for the set
screws are facing down.
6 While holding handle firmly
against drawer, fasten left and
rightAllensetscrews(C)with
suppliedAllenwrench.
End
Cap
End
Cap
End
Cap
End
Cap
Mounting Refrigerator Handles
End
Cap
End
Cap
Mounting Freezer Handle
NOTE
To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.