Use & care guide

12 Feature Overview
INTERIOR
! [] [] [] [] [] [] [] [] [] ! [] [] [] [] [] [] [] [] [] [] []
Your coffee maker requires periodic cleaning and maintenance. See the Care and
Cleaning section for more information.
Brewing Unit Door
Piston Assembly
Grinder Adjustment Screw
Used Coffee Ground Bin
Open the brewing unit door to clean the
inside of your coffee maker and make
certain types of adjustments.
The piston assembly is used by the coffee
maker to help make coffee. It requires
occasional cleaning.
Usethe grinder adjustment screw (with the
included tool) to make the coffee maker
grind the coffee beans more Fine or course.
The finer the coffee beans are ground, the
stronger the brewed coffee will be.
The used coffee ground bin catches the
used coffee grounds after coffee has
been made. It needs to be emptied out
occasionally.
ACCESSORIESAND PARTS
[] [] [] II [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Coffee Scoop
Cleaning Brush
Grinder Adjustment Wrench
Piston Assembly O-Ring (green)
Water Tank O-Ring
Use the scoop to poor pre-ground coffee
into the ground coffee chute.
Use to clean the inside of the brewing unit.
Use the coffee grinder adjustment wrench
to turn the coffee grinder adjustment screw.
A spare piston assembly O-ring is provided
with the coffee maker should the grinder
assembly need service. Keep it in a safe
place in case it is needed at a later date.
Used on model E24CM75GSS only. A
spare water tank O-ring is provided should
the O-ring on the water tank wear out.
Keep it in a safe place in case it is needed
at a later date.