Installation Guide

13
30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
7
Level the Range
Level the range and set cooktop height before
installation in the cut-out opening (if applicable).
1. Install an oven rack in the center of the oven.
2. Place a level on the rack (Figure 20). Take 2
readings with the level placed diagonally in one
direction and then the other.
3. Level the range, if necessary, by adjusting the 4 leg
levelers with a wrench (Figure 21).
4. Slide range into cut-out opening and double check
for levelness. If the range is not level, pull unit out
and readjust leveling legs, or make sure oor is level.
Figure 20: Use the oven racks to level appliance
Figure 21: Adjusting appliance height
Leveling leg
Raise
Lower
Base of Range
Decorative
Leg Screw