Installation Guide

6
30" & 36" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
NOTES:
1. Do not seal the range to the side cabinets.
2. Clearance from adjacent walls or other vertical surfaces or structures such as cabinets.
3. Measurements listed are minimum clearances between the cooktop and the bottom of the cabinet.
4. 0" clearance between range and cabinets or vertical surfaces that are below the cooktop height.
5. 0" clearance between range back and rear wall or cabinet.
Cabinet Dimensions
Clearances and Dimensions
• Provide adequate clearances between the appliance and adjacent combustible surfaces.
• Location - Check location where the appliance will be installed. Check for proper electrical supply and oor
stability.
• Dimensions shown must be used. Given dimensions provide minimum clearance. Contact surface must be
solid and level.
MODEL
F. MINIMUM
CUTOUT WIDTH
G. HEIGHT OF
COUNTERTOP
H. CLEARANCE
FROM SIDE
WALLS
2
I. CLEARNACE
FROM COOKTOP
AND CABINET
BOTTOM
3
J. CLEARANCE
WIDTH OF
OVERHEAD
CABINETS
30" 30 1/16" (76.4 cm)
36" (91.4 cm) Standard
35 3/4" (90.8 cm) Min.
5" (12.7 cm) Min. 30" (76.2 cm) Min. 30" (76.2 cm) Min.
36" 36 1/16" (91.6 cm) 7" (17.8 cm) Min. 36" (91.4 cm) Min. 36" (91.4 cm) Min.
H
I
F
G
J
18" Min.
(45.7 cm Min.)
13" Max.
(33 cm Max.)
24" Min.
(61 cm Min.)
24½" max.
(62.2 cm Max.)
Figure 2: Cabinet Dimensions