Manual

ManualsBrandsElectrolux ManualsFreestanding FreezerOfficial Electrolux freezer

Door Removal & Temperature Control

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

Door Removal iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

,fdoormustberemoved: iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

• Unplug the unit or switch the breaker Hinge

that supplies power to the unit to the

off position.

Remove the plastic top hinge cover.

Hold the door in place while removing

the top hinge from the cabinet.

• Remove the two 3/8"hex head bolts

from the top hinge with a 3/8"wrench

or socket.

Hinge Bolts (2) .._._

Hinge Plate

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;i_

'_ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

Lift the door upwards and pull up

and away from the cabinet until free

of the bottom hinge pin mounted on

the front of the cabinet.

To replace the door, reverse the above

procedures and securely tighten all

screws to prevent hinge slippage.

Setting The Custom Set TM Electronic Control

COOL DOWN PERIOD

For safe food storage, allow 4 hours for the appliance to cool down completely. The unit

will run continuously for the first several hours.

CUSTOM SET TM ELECTRONIC CONTROL

The Custom Set TM Electronic Control is located inside the appliance. Temperature is

factory preset to provide satisfactory food storage temperatures. However, the temperature

control is adjustable to provide a range of temperatures for your personal satisfaction.

I _

_ITM I ._.,_._._._,,.,__ _:-__, _'_,__.'_,_,

TOadjust the temperature setting, press the UP (+) key for warmer temperature and DOWN

(-) key for colder temperature on the control panel. Allow several hours for the temperature

to stabilize between adjustments. The unit can be adjusted between -10°F (-23°C) and

10°F (-12°C).. By pressing the TEMP MODE key, the temperature display will toggle

between °F to °C.

To turn the appliance OFF, press the UP (+) key until the warmest temperature setting of

10°F (-12°C). show in the display. Then press the UP (+) key 3 times within 3 seconds to

turn the unit OFR The display will then scroll "OFF" across the display. To turn the unit back

ON, press the DOWN key 3 times within 3 seconds. The control will then display "10°F

(-12°C).)'' and may be adjusted to the desired temperature.