Service manual

Component Teardown
6-4
Adjustable Door Bins Removal
There are four two liter door bins that can be arranged
as needed by the user.
To remove a two liter door bin, lift the bin straight up
until it is free of the supports molded into the door liner,
then pull from unit. (See Figure 6-7)
Dairy Door Removal
The dairy door has a hole on each side that fi ts over
molded pins in the door liner.
To remove the dairy door:
1. Open dairy door.
2. Grab the dairy door on each side and flex the outer
edge inwards until the door is free of the pins in the
door liner, then pull from door. (See Figure 6-8)
Door Switch Removal
The door switch is mounted inside a hole in the cabinet
base along the lower left hand side.
(See Figure 6-9)
To remove the door switch:
1. Disconnect unit from power supply.
2. Remove kickplate.
3. Reach into the access hole next to the door switch
and disconnect the electrical leads from the door
switch terminals.
4. Press in on the retaining latch on the switch body
and push switch through hole in cabinet base.
Figure 6-7. Adjustable Door Bin Removal
Figure 6-9. Door Switch Removal
Door Switch
Access Hole
Figure 6-8. Dairy Door Removal