Service manual

Component Teardown

6-18

Door Bin Removal

There are two door bins that can be arranged as needed

by the user.

To remove a door bin, lift the bin straight up until it is free

of the supports molded into the door liner, then pull from

unit. (See Figure 6-38)

Tilt Out Wire Shelf Removal

The tilt out wire shelves have a bar that locates in the end

caps that enable the wire shelves to tilt outward. The end

caps have two standoffs that snap into holes in the inner

panel.

To remove the tilt out wire shelves:

1. Flex the inner panel outward and lift the wire shelf

out of the end cap. Then pull the opposite end of the

wire shelf out of the opposite end cap.

(See Figure 6-39)

2. The end caps are removed by simply pulling the end

caps out of the inner panel.

Door Stop Assembly Removal

The door stop is secured to with two screws the

underside of the door assembly.

To remove the door stop:

1. Remove door from unit.

2. Extract the two screws securing the door stop to the

bottom of the door assembly. (See Figure 6-40) Door

stop assembly is now free.

Figure 6-39. Door Lock Removal

Figure 6-38. Door Shelf Guard Removal

End Cap

Wire Tilt-out Shelf

Figure 6-40. Door Stop Removal

Door Frame

Door Stop

Hinge Bearing

Screws