Manual

MOUNTINGTHE HOODTO SUPPORTFRAME
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
1 Insert four (4) bolts through the top of the hood from the inside,
2 Use four (4) nuts and four (4) washers to secure hood to support frame.
[] []
r
INSTAL,LINGTHE EIIII,,,,,,,,,,ECTRICAIIII..........
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
1 Remove the wiring box cover. Remove a knockout from the wiring
box.
2 Feed 6" of power cable through the knockout opening and secure
cable to the wiring box with an appropriate connector.
3 Make electrical connections. Connect white to white, black to black
and green to green.
4 Replace wiring box cover and screws. Check that wires are not
pinched between cover and box.
WiRiNG BOX COVER
Figure 13