INSTRUCTIONS MANUAL SPLIT TYPE ROOM AIR CONDITIONER MODELS: EAS(C,E)09C5ATLW EAS(C,E)12C5ATLW EAS(C,E)18C5ATLW EAS(C,E)24C5ATLW 140721A S6(06-09)EM_ENGLISH Please read this manual completely before operating your room air conditioner.
notes electrolux 54 01 electrolux welcome Welcome to the world of simple handling and no worries. Thank you for choosing Electrolux. This manual contains all of the information required to guarantee your safety and the appropriate use of your air conditioner. Please read all of the instructions before using the air conditioner and keep this manual for future reference. We know you will enjoy your new air conditioner and thank you for choosing our product. We hope you will consider us for future purchase.
contents electrolux 02 53 electrolux notes Contents NOTES 01. 02. 03. 04. 05. Welcome.........................................................................................................01 Environmental advices....................................................................................01 Contents..........................................................................................................02 Safety precautions........................................................................
03 electrolux contents technical specifications electrolux 52 Technical specifications COLD MODELS The air conditioner that you have bought may be slightly different from the one illustrated in this manual. Please refer to the information related to the model you have. This air conditioner is for domestic use only. It is not reccomended for commercial or industrial use. The air conditioner you have may carry a different plug than the one illustrated in this manual.
safety precautions electrolux 04 51 electrolux solutions for problems Solutions for problems Safety precautions If your air conditioner malfunctions, check the following information to find solutions or probable causes of the failure. Do not try to repair the unit by yourself, if these solutions do not solve the failures; call your local service repair team. To prevent injury to the user or other people and property damage, the following instructions must be followed. Poor Equipment performance 1.
05 electrolux safety precautions conditioner. It contains contaminants and could make you sick. 10.Do not use the power cord close to heating appliances. It may cause fire and electric shock. 11.Do not damage or use an unspecified power cord. It may cause electric shock or fire. 12.Do not direct airflow at room occupants only. This could damage your health. 13.Always install circuit breaker and a dedicated power circuit. No installation may cause fire and electric shock. 14.
safety precautions electrolux 06 49 electrolux operation tips Operation tips The following events may occur during normal operation. Protection of the air conditioner. Compressor protection The compressor can't restart for 3 minutes after it stops. Anti-cold air (Cooling and heating models only) The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached. 1. When heating has just starting.
maintenance electrolux 48 07 electrolux safety precautions falling of unit. 28.Always insert the filters securely. Clean filter once every two weeks. Operation without filters may cause failure. 29.Do not place heavy object on the power cord and take care so that the cord is not compressed. There is danger of fire or electric shock. 30.Do not place obstacles around airinlets or inside of air-outlet. It may cause failure of appliance or accident. then dry. 6.
choosing the installation site electrolux 08 47 electrolux maintenance Maintenance Choosing the installation site Cleaning the indoor unit and remote controller Precautions for Installation Installation at the following sites may cause problems. If you must inevitably install the unit at one of these sites, please consult your local distributor beforehand: 1. It is necessary to stop the air conditioner and disconnect the power supply before cleaning. 2.
manual operation (without remote control) electrolux 46 09 electrolux outdoor unit Manual operation (without remote control) Outdoor Unit 1. The outdoor unit must be installed at a convenient site that is not exposed to strong winds. The site should be dry and well ventilated. More than 30cm More than 60cm More than 30cm 2. The site must support the weight of the outdoor unit and allow for vertical installation. 3. There must not be the possibility of increased noise and vibration at the site. 4.
parts list electrolux 10 45 electrolux how to use the indoor unit Parts list Press the SWING button on the remote controller. To stop the function, press the SWING button again. Press AIR DIRECTION button to lock louver in desired position. The AIR DIRECTION and SWING buttons will be disabled when the air conditioner is not in operation (including when the TIMER ON is set). Do not operate the air conditioner for long periods with the air flow direction set downward in cooling or dry mode.
how to use the indoor unit electrolux 44 11 electrolux parts list How to use the indoor unit 1 More than 15cm 2 3 Indoor unit More than 12cm 6 7 Adjusting the vertical air flow direction (up - down) The air conditioner automatically adjusts the vertical air flow direction in accordance with the operating mode.
indoor unit installation electrolux 12 43 electrolux how the air conditioner works Indoor unit installation Optimal operation Installation plate description To achieve optimal performance, please note the following: 45 2. Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature levels. 41 1. Adjust the air flow direction correctly so that it is not directed on people. 3. Close doors and windows on COLD or HEAT modes, or performance may be reduced.
how the air conditioner works electrolux 42 13 electrolux indoor unit installation 24k Btu models A type 24k Btu models B type To set the stopping time Fit the Installation Plate and drill holes in the wall according to the wall structure and corresponding mounting points on the installation plate (Dimensions are in “mm” unless otherwise stated). 1.
indoor unit installation electrolux 14 41 electrolux how the air conditioner works Connective pipe and drainage installation SLEEP mode Drainage Sleep function is only availaible in the Cold/Heat and AUTO mode. Cold only mode: • The indoor unit fan operates at a low velocity. 1 °C Set temperature • After and hour of operation, the adjusted temperature will increase 1º C. After, the unit keeps operating 2ºC above the adjusted temperature.
how the air conditioner works electrolux 40 Indoor unit Cable de conexión Pipe room Connective pipe Drain hose ng oli Co no nly ng Fa oli Co nly ng no Ponding box Due to the difference of the set temperature of the unit and the actual indoor temperature, the Air Conditioner when in DRY mode will automatically operate many times without running the Cold and FAN mode. Fa Piping and wrapping 1. Bundle the tubing, connecting cable, and drain hose with tape securely, evenly as shown. 2.
outdoor unit installation electrolux 16 39 electrolux how the air conditioner works How the air conditioner works Outdoor unit installation Automatic operation When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the display panel of the indoor unit starts flashing. 1. Install the outdoor unit on a rigid base to prevent increasing noise level and vibration. 2. Determine the air outlet direction where the discharged air is not blocked.
lcd display indicators electrolux 38 17 electrolux outdoor unit installation LCD display indicators A Settlement of outdoor unit Anchor the outdoor unit with a bolt and nut 10 or 8 tightly and horizontally on a concrete or rigid mount.
refrigerant pipe connection electrolux 18 37 electrolux remote control description Refrigerant pipe connection timed setting in 30 minutes increments. When the setting time displays 10:00, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0:00. 13 14 LOCK: When you press the recessed LOCK button, all current settings are locked in and the remote controller does not accept any operation except that of the LOCK.
remote control description electrolux 36 19 electrolux refrigerant pipe connection 4. Flaring work A) Firmly hold copper pipe in a die in the dimension shown in the table below. OUTER DIAMETER (mm) 6,35 1,3 0,7 9,52 1,6 1,0 12,70 1,8 1,0 2,2 Flare nut 7 Yoke Red arrow mark 8 Clamp handle 2,0 Connection Adjustment 1. Align the pipes to be connected. 2. Unscrew the flare nut with your fingers and then with a wrench and screw wrench, as shown in the following figure.
electrical work electrolux 20 35 electrolux remote control description Electrical work Remote control description 1 2 MODE: Each time you push the button, a mode is selected in a sequence that goes from AUTO, COLD, DRY, HEAT*, and FAN, as the following figure indicates: AUTO COLD DRY HEAT* FAN * Note: Only for heating models. 3 Electric safety regulations for the initial Installation TEMP :Press the button to decrease the indoor temperature setting.
remote control electrolux 34 21 electrolux electrical work Connect the cable to the indoor unit Electric safety regulations for the initial Installation 1. If there is serious safety problem about the power supply, the technicians should refuse to install the air conditioner and explain to the client until the problem is solved. 2. Power voltage should be in the range of 90%~110%of rated voltage. 3. The surge protector and main power switch with a 1.5 times capacity of Max.
electrical work electrolux 22 33 electrolux remote control Remote control Remote control operation Before performing any electrical work, turn off the main power to the system. 1. The inside and outside connecting cable can be connected without removing the front grille. 2. The indoor power cord type is H05VV-F or H05V2V2-F, the outdoor power cord and interconnected cord type is H07RN-F. 3. Lift the indoor unit panel up, remove the electrical box cover by loosening the screw. 4.
product description electrolux 32 23 electrolux electrical work Display panel (indoor unit) Connect the cable to the outdoor unit 1. Remove the electrical control board cover from the outdoor unit by loosening the screw. 2. Connect the connective cables to the terminals as identified with their respective matched numbers on the terminal block of indoor and outdoor units. 3. Secure the cable onto the control board with the cord clamp. 4.
electrical work electrolux 24 31 electrolux product description Product description 1 Front panel frame Terminal block of outdoor unit 2 Front panel 3 Air filter For 8k, 12k and 18k Btu models (inside front panel) 4 Horizontal airflow grille 5 Vertical airflow grille Terminal block of outdoor unit 6 Temperature sensor 7 8 9 (inside front panel) Panel Infra-red signal receiver Drain hose connector and refrigerant gas connector Remote control 10 11 Connector cable 12 Detection valve 13 Drain hose an
preparing the device for operation electrolux 30 25 electrolux electrical work Preparing the device for operation Caution After the confirmation of the above conditions, prepare the wiring as follows: 1. Never fail to have an individual power circuit specifically for the air conditioner. As for the method of wiring, be guided by the circuit diagram posted on the inside of control cover. 2.
29 electrolux operation test electrical work electrolux 26 Operation test Perform test operation after completing gas leak check at the flare nut connections and electrical safety check. 1. Connect the power, press the ON/OFF button on the remote controller to turn the unit on. 2. Use the MODE button to select COLD, HEAT, AUTO and FAN to check if all the functions works well. 3.
gas leak check electrolux 28 27 electrolux electrical work Gas leak check When using the vacuum pump For method of using a manifold valve, refer to its operation manual. 1. Completely tighten the flare nuts, A, B, C, D, connect the manifold valve charge hose to a charge port of the low-pressure valve on the gas pipe side. 2. Connect the charge hose connection to the vacuum pump. 3. Fully open the handle Lo of the manifold valve. 4. Operate the vacuum pump to evacuate.