User manual

You have to set the language, the
Display Brightness, Water hardness and
the Time of Day.
5.3 Setting the hardness level
for the water
When you connect the appliance to the
mains, you have to set the water
hardness level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality
of the water.
Water hardness Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas‐
sification
Class dH
1 0 - 7 0 - 1.3 0 - 50 Soft
2 7 - 14 1.3 - 2.5 50 - 100 Moderately
hard
3 14 - 21 2.5 - 3.8 100 - 150 Hard
4 over 21 over 3.8 over 150 Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water. To check the
hardness level of the water you can use
water strips or contact your water
supplier.
You can change the hardness level of
the water in the menu: Basic Settings /
Water hardness.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heating Functions
Turning the heating functions on and off.
1. Turn on the oven.
2. Hold the rotary knob.
The last used function is underlined.
3. Press the rotary knob to enter the
submenu and turn it to select a
heating function.
4. Press the rotary knob to confirm.
5. Set the temperature and confirm.
6. Press . Food Sensor can be
plugged at any time before or during
cooking process. Some functions
contain a sequence of pop-ups.
Press the rotary knob to go to the
next pop-up. After the last
confirmation the function starts.
To turn off a function press .
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
www.electrolux.com10