User manual

Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Use only cold tap water. Do
not use filtered
(demineralised) or distilled
water. Do not use other
liquids. Do not put
flammable or alcoholic
liquids into the water drawer.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with cold water
to the maximum level (around 950
ml) until the signal sounds or the
display shows the message. Do not
fill the water drawer over its
maximum capacity. There is a risk of
water leakage, overflow and furniture
damages.
3. Push the water drawer to its initial
position.
4. Turn on the appliance.
5. Set a steam heating function and the
temperature.
6. If necessary, set the function:
Duration
or: End Time .
The steam appears after
approximately 2 minutes. When the
appliance reaches the set
temperature, the signal sounds.
When the water drawer is running out
of water, the signal sounds and the
water drawer needs to be refilled to
continue the steam cooking as
described above.
The signal sounds at the end of the
cooking time.
7. Turn off the appliance.
8. Empty the water drawer after the
steam cooking is completed.
Refer to the cleaning function: Tank
emptying.
CAUTION!
The appliance is hot.
There is a risk of burns.
9. After Steam Cooking steam can
condensate on the bottom of the
cavity. Always dry the bottom of the
cavity when the appliance is cool.
Let the appliance dry fully with the door
open. To speed up the drying you can
close the door and heat up the appliance
with function: True Fan Cooking at
temperature 150°C for approximately 15
minutes.
6.2 Menu - overview
Options
Menu
170°C
Menu
Menu item Application
Assisted Cooking Contains a list of automatic programmes.
Cleaning Contains a list of cleaning programmes.
Basic Settings Used to set the appliance configuration.
Submenu for: Cleaning
Submenu Description
Quick Pyrolytic cleaning.
1 h for a low degree of dirt.
Normal Pyrolytic cleaning.
1 h 30 min for a usual degree of dirt.
ENGLISH 13