Product Manual

The automatic ice making function pumps
water from the water tank located in the
refrigerator and dispenses it into the automatic
ice maker in the freezer.
The ice will then be dropped into the ice bin
located beneath the ice maker. If the water
tank is empty or lower than level, the ice maker
will automatically turn off after 3 attempts at
pumping water from the tank. The ice maker
indicator on the user interface shows the
operational status of the ice maker (Refer
control instructions).
In case water tank is empty and ice maker
show “off” status with red light, you simply can
fill up water and just have to select “
ICEMAKER” to be “on” again to turn on ice
maker to continuous making ice.
Water Tank Refilling
Step 1. Open the tank cover lid up and off from
the cover.
Step 2. Pour potable water through the lid at
the top of the water tank.
Step 3.
Closed the tank cover lid.
CAUTION
Do not fill the water tank with anything
other than clean water (Filtered or
Mineral water), soft drink, juice, tea or
hot water etc, can damage your
automatic icemaker. The water tank
can withstand a maximum water
temperature of 60°C.
Tips and Useful Information
Remove and clean ice bin and water
tank once a month, discarding unused
ice and water. This will ensure fresh ice
and smooth operation of your
icemaker. Make sure your refrigerator
is level to avoid uneven ice cubes.
It is recommended to always keep
water level filled above the “Min” level
indication to have water ready for your
chilled drinks, and ready for ice making.
It is recommended to dispense water
out in frist few glasses and/or ice
production to flush out the system or
any impurities in first time use or after
installation.
6. Automatic Ice Maker
ENGLISH 29