User manual

20 21www.electrolux.com
support and pin at the bottom, then
push the PUSH symbol fully in until it
clicks into place.
Support
Pin
If the brewing unit is difficult to
insert, you must first adapt it to
the right dimensions by pressing it
forcefully from the bottom and top
as shown in the figure.
7. Once inserted, make sure the two red
buttons have snapped out.
8. Replace the drip tray and waste cof-
fee container.
9. Close the service door.
When the appliance is ready, you can
use the internal menu to modify the fol-
lowing parameters and functions:
• Chooselanguage
• Rinsing
• Shut-offtime
• Setclock
• Starttime
• Auto-start
• Temperature
• Waterhardness
• Programcoffee
• Programjug
• Programhotwater
• Descale
• Resettodefault
• Statistics
• Buzzer
• Contrast
17.1 Setting the language
To change the language on the display,
proceed as follows:
• Pressthe icon (B2) to enter the
menu. “CHOOSE LANGUAGE” is
displayed.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8)
until the required language is dis-
played.
• PresstheOKicon(B9)toconfirm.
• Pressthe icon (B6) to exit the
menu.
If you choose the wrong language,
you can access the menu directly
to modify the parameter.
• Pressthe icon (B2) for at least 7
seconds until the appliance displays
the various languages.
• Choosetherequiredlanguageas
described in the section “Using the ap-
pliance for the first time”.
17.2 Rinsing
This function enables you to obtain hotter
coffee.
Proceed as follows:
• Whenyouturntheapplianceon,ifyou
want to make a small cup of coffee
(less than 60 cc), preheat the cup by
17. CHANGING AND SETTING MENU PARAMETERS