User manual

23ENGLISH
clean water.
• Replacethetankfullofcleanwater.
“RINSING PLEASE CONFIRM” is
displayed again.
• PresstheOKicon(B9)again.
Hot water flows out of the spout into
the container below and “RINSING” is
displayed.
• Waituntil“RINSINGCOMPLETE
PLEASE CONFIRM” is displayed.
• PresstheOKicon(B9).“DESCALE
COMPLETE” is displayed, then “FILL
TANK!”. Fill the tank again with clean
water.
• Thedescaleprogrammeisnowter-
minated and the appliance is ready to
make coffee again.
NOTE: If descaling is interrupted be-
fore completion, the process must be
begun again from the beginning.
IMPORTANT! FAILURE TO
DESCALE THE APPLIANCE
REGULARLY INVALIDATES THE
GUARANTEE
17.12 Resetting default values
(reset)
If you change the original values, the
default values can be reset as follows:
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “RESET TO DEFAULT”
is displayed.
• PresstheOKicon(B9)andtheappli-
ance displays “RESET TO DEFAULT
PLEASE CONFIRM”.
• presstheOKicon(B9)toresetthe
default values;
17.13 Statistics
This displays statistics relating to the
machine. To display, proceed as follows:
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “STATISTICS” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) to
verify:
• Howmanycoffeeshavebeenmade.
• Howmanytimesthemachinehas
been descale
• Thetotalnumberoflitresofwater
delivered.
• Pressthe icon (B6) once to exit
the function or twice to exit the menu.
17.14 Buzzer
This activates or deactivates the buzzer
emitted by the machine each time an
icon is pressed or an accessory is in-
serted/removed.
The buzzer is active by default.
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “BUZZER” is displayed.
• PresstheOKicon(B9).“BUZZER
PLEASE CONFIRM” is displayed.
• Pressthe icon (B6) to disable or
the OK icon (B9) to enable the buzzer.
• Pressthe icon (B6) to exit the
menu.
17.15 Adjusting contrast
To increase or reduce the contrast of the
display, proceed as follows:
• Pressthe icon (B2) to enter the
menu and then the icons (B7)
and (B8) until “CONTRAST” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8)
until the required display contrast is
reached.
The progressive bar indicates the level
of contrast selected.
• PresstheOKicon(B9)toconfirm.
• Pressthe (B6) icon (B6) once to
exit the function or twice to exit the
menu.