User manual

3.
Select your favourite programme
name. Press OK to confirm.
Press
to go to Favourite Programme
directly. You can also use it when the ap-
pliance is deactivated (for selected mod-
els only).
10.2 Child Lock
The Child Lock prevents an accidental
operation of the appliance.
Activating and deactivating the Child
Lock function:
1.
Activate the appliance.
2.
Touch and at the same time
until the display shows a message.
10.3 Function Lock
The Function Lock function prevents an
accidental change of the heating function.
You can activate the Function Lock func-
tion only when the appliance operates.
Activating the Function Lock function:
1.
Activate the appliance.
2.
Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock func-
tion.
4.
Press OK to confirm.
Deactivating the Function Lock
function:
1.
Press two times.
2.
Press OK to confirm.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1.
Activate the appliance.
2.
Set the heating function.
3.
Press again and again until the
display shows Duration .
4.
Set the time.
5.
Press again and again until the
display shows SET + GO .
6.
Press OK to confirm.
To start SET + GO function, press any
sensor field (except for
). The set heat-
ing function starts.
When the heating function ends, an
acoustic signal sounds.
• When the heating function operates,
the Function Lock function is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If a heating function operates.
• If you do not change the oven tempera-
ture.
Oven temperature Switch-off time
30 °C - 115 °C 12.5 h
120 °C - 195 °C 8.5 h
200 °C - 230 °C 5.5 h
The automatic switch-off works
with all functions, except Light ,
Duration and End Time .
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– If the appliance is deactivated and
you set the function Minute Minder .
When the function ends, the display
goes back to the night brightness.
ENGLISH 17