User manual

10.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you de-
activate the appliance, the cooling fan can
continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause a damage to the
nonstick coating.
11.1 Steam Cleaning
1.
Remove as much dirt as possible
manually.
Clean the inner door glass with a soft
cloth with warm water and a cleaning
agent.
CAUTION!
For a better performance you
should start the Steam Cleaning
function when the appliance is
cool. Check the residual heat.
Remove the shelf support to clean
the side walls.
2.
Put 250 ml of water mixed with 3 ta-
blespoons of vinegar (without herbs)
directly into the steam generator.
3.
Activate the Steam Cleaning function
in the main menu. The duration of the
function is approximately 15 minutes.
The display shows the duration of the
function.
4.
An acoustic signal sounds when the
programme is completed. Touch the
sensor field to deactivate the signal.
5.
Wipe the internal surface of the appli-
ance with a soft cloth.
6.
Remove the remaining water from the
steam generator.
7.
After cleaning keep the appliance
door open for approximately 1 hour.
Wait until the appliance is dry. To
speed up the drying you can heat up
the appliance with hot air at tempera-
ture 150 °C for approximately 15 mi-
nutes.
Always use the Steam Cleaning
function after cooking with steam.
You can get maximum effects of
the Steam Cleaning function if you
manually clean the appliance im-
mediately after the Steam Clean-
ing function ends.
Use the Steam Cleaning function
two times if the level of dirt is high.
Make sure that the appliance is
cool before you activate the sec-
ond cycle.
18
www.electrolux.com