User manual

58 electrolux installation instructions
Installing the oven in the base unit
When installing into combustible
material, NIN 2005, chapter 4.2.2
and the fire protection guidelines
and their provisions set by the Asso-
ciation of Swiss Fire Insurance
Companies must be strictly ob-
served.
After successful connection to the
electricity supply (see next page):
1. Push the cooker into the recess so
that it is flush with the surrounding
units.
2. Secure the cooker on both sides in
the oven area with two screws
(Detail A).
When installing next to wood fur-
naces, for safety reasons, a heat-re-
sistant and heat-insulating
insulation plate is to be installed on
site to the same height as the appli-
ance and a minimum of 30 cm deep.
To secure at the top, 2 holes with
ø 2.8 mm as stamped can be drilled
(Detail C).