EBKSL6CN EBKSL6SP EN Oven User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................3 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 7 4. CONTROL PANEL............................................................................................. 8 5. BEFORE FIRST USE...............................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • • • Always use oven gloves to remove or put in accessories or ovenware. Before carrying out any maintenance, disconnect the appliance from the power supply. Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. Do not use a steam cleaner to clean the appliance.
ENGLISH • • • • • • • • • • • • • • All electrical connections should be made by a qualified electrician. The appliance must be earthed. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable.
www.electrolux.com • • Always cook with the oven door closed. If the appliance is installed behind a furniture panel (e.g. a door) make sure the door is never closed when the appliance is in operation. Heat and moisture can build up behind a closed furniture panel and cause subsequent damage to the appliance, the housing unit or the floor. Do not close the furniture panel until the appliance has cooled down completely after use. 2.
ENGLISH 3. PRODUCT DESCRIPTION 3.1 General overview 1 2 3 4 5 6 7 8 5 4 10 3 2 1 1 Control panel 2 Electronic programmer 3 Socket for the core temperature sensor 4 Heating element 5 Odour filter 6 Lamp 7 Turnspit hole 8 Fan 9 Shelf support, removable 10 Shelf positions 9 3.2 Accessories Wire shelf For cookware, cake tins, roasts. Baking tray To bake and roast or as a pan to collect fat. Food Sensor To measure the temperature inside the food. Turnspit For cakes and biscuits.
www.electrolux.com 4. CONTROL PANEL 4.1 Electronic programmer 1 2 3 4 5 6 7 8 9 10 11 Use the sensor fields to operate the oven. Sensor field 1 2 3 4 5 6 7 8 9 - Function Comment Display Shows the current settings of the oven. ON / OFF To turn on and off the oven. Heating Func‐ tions or Assisted Cooking Press the sensor field to choose the menu: As‐ sisted Cooking or Heating Functions. To turn on or turn off the light, press the field for 3 sec‐ onds.
ENGLISH Sensor field Function Comment Time and addi‐ tional functions To set different functions. When a heating func‐ tion operates, press the sensor field to set the timer or the functions: Function Lock, Favour‐ ites, Heat + Hold, Set + Go. You can also change the settings of the core temperature sensor. Minute Minder To set the function: Minute Minder. 10 11 4.2 Display A 9 B C E D A. B. C. D. E.
www.electrolux.com Symbol Function Weight Automatic The display shows that the automat‐ ic weight system is on or that weight can be changed. Heat + Hold The function is on. 5. BEFORE FIRST USE WARNING! Refer to Safety chapters. 5.1 Initial Cleaning Remove all accessories and removable shelf supports from the oven. Refer to "Care and cleaning" chapter. 5.
ENGLISH Symbol / Menu Application item Basic Settings Specials Used to set the appli‐ ance configuration. Symbol / Menu Description item Key Tones Contains a list of ad‐ ditional heating func‐ tions. Submenu for: Basic Settings Symbol / Menu Description item Sets the current time Set Time of Day on the clock. When ON, the dis‐ Time Indication play shows the cur‐ rent time when you deactivate the appli‐ ance.
www.electrolux.com Heating func‐ tion Conventional Cooking (Top / Bottom Heat) Application To bake and roast food on one shelf po‐ sition. Heating func‐ tion Slow Cooking To bake bread. To bake cakes with crispy bottom and to preserve food. For dishes such as lasagna or potato gratin. To make gra‐ tins and to brown. Au Gratin To rise the yeast dough before baking. Dough Proving To preheat plates for serving. To grill flat food and to toast bread.
ENGLISH 6. Set the temperature. 7. Press 13 Do not put food in the oven when the Fast heat up function works. to confirm. 6.6 Heat-up indicator When you turn on a heating function, the bar on the display comes on. The bar shows that the temperature increases. When temperature is reached the buzzer sounds 3 times and the bar flashes and then disappears. 6.7 Fast Heat Up To turn on the function, hold for 3 seconds. The heat-up indicator alternates. 6.
www.electrolux.com 4. Press to confirm. When the time ends, a signal sounds. The oven turns off. The display shows a message. 5. Press any symbol to stop the signal. 7.3 Heat + Hold Conditions for the function: • • The set temperature is more than 80 °C. The function: Duration is set. 5. Press to confirm. When the function ends, a signal sounds. The function stays on if you change the heating function. 7.
ENGLISH 15 With some programmes turn over the food after 30 minutes. The display shows a reminder. 9. USING THE ACCESSORIES WARNING! Refer to Safety chapters. 9.1 Core temperature sensor There are two temperatures to be set: the oven temperature and the core temperature. The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the oven turns off. CAUTION! Only use the core temperature sensor supplied or the correct replacement parts.
www.electrolux.com A B C D 8. Remove the turnspit handle. 9. Select a function with the turnspit position. The turnspit rotates. 10. Set the necessary temperature. Refer to the cooking tables or the recipe book. The turnspit does not stop if you open the oven door. A. B. C. D. Turnspit frame Forks Spit Handle 1. Put the turnspit handle into the spit. 2. Put the deep pan on the lowest shelf position. 3. Put the spit frame on the third shelf position from the bottom. 4.
ENGLISH 17 Small indentation at the top increase safety. The indentations are also anti-tip devices. The high rim around the shelf prevents cookware from slipping of the shelf. 10. ADDITIONAL FUNCTIONS 10.1 Favourites You can save your favourite settings, such as duration, temperature or heating function. They are available in the menu: Favourites. You can save 20 programmes. 3. Press again and again until the display shows: SAVE. to confirm. 4. Press The display shows the first free memory position. 5.
www.electrolux.com 10.4 Set + Go The function lets you set a heating function (or a programme) and use it later with one press of any symbol. 1. Turn on the oven. 2. Set a heating function. again and again until the 3. Press display shows: Duration. 4. Set the time. Temperature (°C) Switch-off time (h) 120 - 195 8.5 200 - 245 5.5 250 - maximum 1.5 The Automatic switch-off does not work with the functions: Light, Food Sensor, Duration, End Time. 5.
ENGLISH water and a cleaning agent. Do not clean the accessories in the dishwasher. Clean stubborn dirt with a special oven cleaner. Do not apply oven cleaner on the catalytic surfaces. If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can cause damage to the nonstick coating. Clean the moisture from the cavity after each use. 11.2 Removing the shelf supports To clean the oven, remove the shelf supports.
www.electrolux.com 2. Clean the glass cover. 3. Replace the lamp with a halogen, 230 V, 40 W, 300 °C heat resistant lamp. 4. Install the glass cover. The side lamp 45° 1. Remove the left shelf support to get access to the lamp. 2. Use a narrow, blunt object (e.g. a teaspoon) to remove the glass cover. 4. Hold the door with one hand on each side and pull it away from the appliance at an upwards angle. 5. Put the door with the outer side down on a soft cloth on a stable surface. 6.
ENGLISH 21 12.1 What to do if... Problem Possible cause Remedy You cannot activate or op‐ erate the oven. The oven is not connected to an electrical supply or it is connected incorrectly. Check if the oven is cor‐ rectly connected to the electrical supply (refer to the connection diagram if available). The oven does not heat up. The oven is turned off. Turn on the oven. The oven does not heat up. The clock is not set. Set the clock. The oven does not heat up.
www.electrolux.com 12.2 Service data If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. plate is on the front frame of the oven cavity. Do not remove the rating plate from the oven cavity. The necessary data for the service centre is on the rating plate. The rating We recommend that you write the data here: Model (MOD.) ......................................... Product number (PNC) ......................................... Serial number (S.
ENGLISH 13.2 Building in 13.3 Installing the oven under a work surface During installation in combustible matter, NIN SEV 1000 and fire protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly adhered to. Before the installation, connect the oven to the electrical supply. Refer to "Electrical connection". 1. Place the appliance in front of the recess and connect the mains plug. Make sure the cable is free when you slide the appliance. 2.
www.electrolux.com min. 20 mm A 2 B 10 mm A 20 mm 13.4 Electrical connection WARNING! If service is required always disconnect the appliance from the power supply. 1 Use a power cable of H05VV-F or higher. Install the appliance with a socket supply line. If there is no socket supply line, the fixed home electrical system must include an isolating device with at least a 3 mm-contact separation to enable a simultaneous and all-pole cut off from the mains (according to NIN SEV 1000).
ENGLISH 13.5 Electrical connection with the hob 25 The hob connection socket is at the top of the oven cabinet. You can connect the oven to an independent hob from the current range of Electrolux and AEG hobs. You can purchase the necessary connection cable separately: • • AK - EB / GKTC (S) 1 m for ceramic hobs. AK - EB / GKTCi (S) 1 m for induction hobs. 14. ENERGY EFFICIENCY 14.
www.electrolux.com to minimum 3 - 10 minutes before the end of the cooking time, depending on the duration of the cooking. The residual heat inside the oven will continue to cook. Use the residual heat to warm up other dishes. cooking time is longer than 30 minutes, the heating elements automatically deactivate earlier in some oven functions. The fan and lamp continue to operate. Keep breaks between baking as short as possible when you prepare few dishes at one time.
ENGLISH 16. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
867303611-E-232018 www.electrolux.