User manual

installation instructions electrolux 51
Electrical connection/power supply
The oven must be connected to the elec-
tricity supply by a designated electrician.
Use a H05VV-F type power cable or higher.
The appliance must be installed with a
socket supply line, otherwise the fixed
home electrical system must include an
isolating device with at least a 3mm-con-
tact separation to enable a simultaneous
and all-pole cut off from the mains, accord-
ing to NIN 2000.
When connecting the appliance directly to
the mains, use at least a 120cm long cable.
1. Lay the power cable flush to the base of
the recess.
2. Take hold of the appliance by the side
grips and slide it ¾ of the way into the
recess.
3. Remove the terminal box from under-
neath.
4. Opening the terminal box (detail D)
5. Open the catch on the cord grip (detail
E).
6. See the connection diagram for the ter-
minal connection.
7. Secure the cord grip by pressing firmly
on the catch (detail F).
8. Closing the terminal box.
9. Tighten the screws on the terminal box
from underneath.
10.Do not use the terminal box to connect
other appliances (e.g. hobs).
In case of repair the appliance must be
switched off from the mains.
Installation diagram
Phase definitions:
L1, L2 (equivalent to R, S)