User manual

6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change
the time of day only when the appliance is off.
DURATION To set how long the appliance operates. Use only
when an oven function is set.
END To set when the appliance deactivates. Use only
when an oven function is set.
TIME DELAY Combination of DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appliance
is off.
00:00
COUNT UP TIM-
ER
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the func-
tions: DURATION, END.
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set
the minutes.
The display shows and the set
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day
flashes in the display.
6.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
4. Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes. and time
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.4 Setting the END
1. Set an oven function.
2. Press
again and again until
starts to flash.
3. Press or to set the hours and
the minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash in
www.electrolux.com10