User manual

Setting the clock functions
1.
Set a heating function.
2.
Press again and again until the
display shows the necessary clock
function and the related symbol.
3.
Press or to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Press a sensor field to stop the signal.
• With Duration and End Time you must
set the heating function and the tem-
perature first. Then you can set the
clock function. The appliance deacti-
vates automatically.
• You can use Duration and End Time at
the same time, if you want to automati-
cally activate and deactivate the appli-
ance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
7.1 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
tivates after the baking or roasting proce-
dure ends.
• You can activate or deactivate the func-
tion in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable for all heating functions with
Duration or Weight Automatic .
• Not applicable for heating functions
with Core Temperature Sensor.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press any
sensor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press to activate (or to cancel).
4.
Set the Extra Time period. Press OK
to confirm.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
8.1 Automatic programmes
These 3 automatic programmes give opti-
mum settings for each type of meat or
other recipes:
• Meat programmes with Weight Auto-
matic function ( Assisted Cooking
menu) — This function automatically
calculates the roasting time. To use it
you need to input food weight.
• Meat programmes with CT Sensor Au-
tomatic function ( Assisted Cooking
menu) — This function automatically
calculates the roasting time. To use it
you need to input core temperature.
When the programme ends an acoustic
signal sounds.
• Recipe Automatic function ( Assisted
Cooking menu) — This function uses
predefined values for a dish. Prepare
the dish according to recipe from this
book.
Weight Automatic dishes
Roast Pork
Roast Veal
14
www.electrolux.com