User manual

Symbol Function
Weight Automatic The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold The function is active.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial position.
5.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast, the
display brightness and the time of the day.
1. Press or to set the value.
2. Press to confirm.
5.3 Preheating
Preheat the empty appliance before first
use.
1. Set the function: Conventional
Cooking and the maximum
temperature.
2. Let the appliance operate for 1 hour.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure that
the airflow in the room is sufficient.
5.4 Setting the hardness level for
the water
When you connect the appliance to the
mains, you have to set the water hardness
level.
The table below explains the water
hardness range with the corresponding
Calcium deposit (mmol/l) and the quality of
the water.
Water hardness Calcium deposit
(mmol/l)
Calcium deposit
(mg/l)
Water clas-
sification
Class dH
1 0 - 7 0 - 1.3 0 - 50 Soft
2 7 - 14 1.3 - 2.5 50 - 100 Moderately
hard
3 14 - 21 2.5 - 3.8 100 - 150 Hard
4 over 21 over 3.8 over 150 Very hard
When the water hardness exceeds the
values in the table, fill the water drawer
with bottled water.
1. Take the four colour change strip
supplied with the steam set in the
oven.
www.electrolux.com10