User manual

The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Empty the water drawer after the
steam cooking is completed.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water drawer.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
6.9 SousVide cooking
• With no evaporative losses of flavour
volatiles and moisture, food keeps its
full aroma
• Tender texture of meat and fish
• Food keeps all minerals and vitamins
• Less spices are necessary as food
keeps its natural flavour
• Better workflow as it is not necessary
to prepare and serve food at the same
time and place
• Low cooking temperature minimizes
the risk of overcooking
• Portioning of the food makes it easy to
hold
Preparing the food
1. Clean and cut the ingredients.
2. Season the ingredients.
3. Fill the ingredients in suitable vacuum
bags.
4. Vacuum seal the bag to make sure
that you remove as much air as
possible.
5. Cold storage of the bags is mandatory
in case the cooking procedure is not
done immediately.
6. Continue with the function: SousVide
cooking following applicable cooking
table indications for the considered
type of food or the assisted cooking
recipes.
7. Open the pouch and serve.
8. Optional: finish the food with a final
searing or grilling e.g. for meat to
achieve a nice crust and the typical
roast flavour.
Activating a function: SousVide
Cooking mode
1.
Activate the appliance.
2. Select the menu: SousVide cooking.
3. Press
to confirm.
4. Set the function: SousVide Cooking
mode.
5. Press to confirm.
6. Set the temperature.
7. Press
to confirm.
6.10 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
6.11 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
for 3
seconds. The heat-up indicator alternates.
6.12 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
www.electrolux.com14